%% 
%% This is file `pctexps.def', generated on <1995/2/23> 
%% with the docstrip utility (2.2i).
%% 
%% The original source files were:
%% 
%% drivers.dtx  (with options: `pctexps,color3,colorfix')
%% 
%% IMPORTANT NOTICE:
%% You are not allowed to distribute this file.
%% For distribution of the original source see
%% the copyright notice in the file drivers.dtx .
%% 
%% drivers.dtx Copyright (C) 1994 David Carlisle Sebastian Rahtz
%%
%% This file is part of the Standard LaTeX `Graphics Bundle'.
%%
%% It should be distributed *unchanged* and together with all other
%% files in the graphics bundle. The file 00readme.txt contains a list
%% of all of these files.
%%
%% A modified version of this file may be distributed, but it should
%% be distributed with a *different* name. Changed files must be
%% distributed *together with a complete and unchanged* distribution
%% of these files.
%%
\ProvidesFile{pctexps.def}
        [1994/12/12 v2.6 Driver-dependant file (DPC,SPQR)]
\def\c@lor@arg#1{%
  \dimen@#1\p@
  \ifdim\dimen@<\z@\dimen@\maxdimen\fi
  \ifdim\dimen@>\p@
    \PackageError{color}{Argument `#1' not in range [0,1]}\@ehd
  \fi}
\def\color@gray#1#2{%
  \c@lor@arg{#2}%
  \def#1{#2 setgray}%
  }
\def\color@cmyk#1#2{\c@lor@@cmyk#2\@@#1}
\def\c@lor@@cmyk#1,#2,#3,#4\@@#5{%
  \c@lor@arg{#1}%
  \c@lor@arg{#2}%
  \c@lor@arg{#3}%
  \c@lor@arg{#4}%
  \def#5{#1 #2 #3 #4 setcmykcolor}%
  }
\def\color@rgb#1#2{\c@lor@@rgb#2\@@#1}
\def\c@lor@@rgb#1,#2,#3\@@#4{%
  \c@lor@arg{#1}%
  \c@lor@arg{#2}%
  \c@lor@arg{#3}%
  \def#4{#1 #2 #3 setrgbcolor}%
  }
\def\color@hsb#1#2{\c@lor@@hsb#2\@@#1}
\def\c@lor@@hsb#1,#2,#3\@@#4{%
  \c@lor@arg{#1}%
  \c@lor@arg{#2}%
  \c@lor@arg{#3}%
  \def#4{#1 #2 #3 sethsbcolor}%
  }
\def\color@named#1#2{\c@lor@@named#2,,\@@#1}
\def\c@lor@@named#1,#2,#3\@@#4{%
  \@ifundefined{col@#1}%
    {\PackageError{color}{Undefined color `#1'}\@ehd}%
  {\edef#4{\csname col@#1\endcsname}}%
  }
\def\c@lor@to@ps#1\@@{#1}
\def\current@color{0 setgray}
\def\set@color{%
  \Raw@PS{\current@color}\aftergroup\reset@color}
\def\reset@color{\Raw@PS{\current@color}}
\def\set@page@color{%
  \c@lor@special\sixt@@n{background color ignored: \current@color}}
\def\define@color@named#1#2{%
  \expandafter\edef\csname col@#1\endcsname{#2}}
\AtBeginDocument{%
  \let\@ldc@l@r\color
  \def\color{\if@inlabel\leavevmode\fi\@ldc@l@r}%
  \let\@ldtextc@l@r\textcolor
  \def\textcolor{\if@inlabel\leavevmode\fi\@ldtextc@l@r}%
  \let\@lduseb@x\usebox
  \def\usebox#1{\@lduseb@x{#1}\set@color}}
\def\Ginclude@eps#1{%
\message{<#1>}%
   \ifGin@clip
     \typeout{no clipping support in pctexps}%
   \fi
   \Gin@req@width.03515\Gin@req@width
   \Gin@req@height.03515\Gin@req@height
   \special{ps:#1\space x=\strip@pt\Gin@req@width cm, 
                        y=\strip@pt\Gin@req@height cm}}

\def\Ginclude@ps#1{%
\message{<#1>}%
  \ifGin@clip
    \typeout{no clipping support in pctexps}%
  \fi
  \hbox{\kern-\Gin@llx\raise-\Gin@lly\hbox{\special{ps:#1}}}%
  \typeout{^^J%
---------------------------------------------------------^^J%
.ps graphics without bounding box information cannot be^^J%
scaled.  If the file actually contains the information,^^J%
please rename the file to .eps file extension.^^J%
---------------------------------------------------------^^J}}

\def\Gin@extensions{.eps,.ps}
\@namedef{Gin@rule@.ps}#1{{ps}{.ps}{#1}}
\@namedef{Gin@rule@.eps}#1{{eps}{.eps}{#1}}

\def\Raw@PS#1{\special{ps::#1}}
\def\Grot@start{%
 \special{ps::gsave currentpoint
 currentpoint translate \Grot@angle\space 
 rotate neg exch neg exch translate}}
\def\Grot@end{\special{ps:: currentpoint grestore moveto}}
\def\Gscale@start{\special{ps:: currentpoint currentpoint translate
  \Gscale@x\space \Gscale@y\space scale neg exch neg exch translate}}
\def\Gscale@end{\special{ps::  currentpoint currentpoint translate
  1 \Gscale@x\space div 1 \Gscale@y\space div scale
  neg exch neg exch translate}}
\endinput
%% 
%% End of file `pctexps.def'.
