# Here is a sample printer devices file where all the printers have
# been commented out.
#
# device_name	loc		dest_host		phys_dev_name		speed	class				def_proc	spooler		stat		kill		daemon		sched
#
# HP LaserJet 4M connected to serial port on an Annex terminal server.
# 2c254			2C-254	rice			tcp!annex!7035		19200	post+600dpi			generic		generic		generic		generic		tcppost		FIFO
#
# HP LaserJet 4M connected to Ethernet via a JetDirect card.
# The speed field is used to set the bufffer size in the tcpostio program run from tcppost.
# 2c307			2C-307	alice			tcp!mh2c307!9100	81920	post+600dpi			generic		generic		generic		generic		tcppost		FIFO
#
# HP LaserJet 4M connected to serial port on a Cisco terminal server.
# 2t4			2T-402	pyxis			tcp!ts!4010			19200	post+600dpi			generic		generic		generic		generic		tcppost		FIFO
#
# HP LaserJet 4Si/MX connected to Ethernet via a JetDirect card.
# This printer has a duplexing option.
# See /sys/lib/postscript/prologues/hpsimx.ps for a fix to make it default
# to the large paper tray at postion 1.
# fn			2C-501	helix			tcp!fn!9100			81920	post2+600dpi+duplex	generic		generic		generic		generic		tcppost		FIFO
#
# Tektronix Phaser 200i connected to Ethernet.
# Using Xinet K-Talk software from a UNIX host.  This software is not recommended.
# We do not want to waste stock on the color printer so we do not print header pages.
# peacock		2C-501	cetus			peacock				-		post2+300dpi+nohead+color	generic		generic		generic		generic		appletalk	FIFO
#
# Any PostScript printer connected to the LPT1 port on my 486 pc running Plan 9 as a terminal.
# pcclone		-			-			/dev/lpt1data		-		post+nohead			generic		pcclone		-			-			-			-
#
# QMS-410 connected to the serial port of an NCD terminal.
# math34		2T-102	rice			tcp!math34!87		9600	post+600dpi			generic		generic		generic		generic		tcppost		FIFO
#
# QMS-410 connected to the serial port of an AT&T 630/730 terminal
# ps630		printer-on-630	-			-					-		post+300dpi+nohead	generic		ps630		-			-			-			-
#
# Xante Accel-a-Writer-8200.  1200dpi printer that uses a BSD lpr print daemon protocol
# psu		2C-501		cetus			psu					-		post+1200dpi		generic		generic		xante		generic		lpddaemon	FIFO
#
# sends the output to the standard output of the lp command.
# stdout	-			-				-					-		post+nohead			generic		nospool		-			-			-			-
#
# sends the output to the standard output of the lp command.
# used for generating output suitable for 100 dpi.
# 100dpi	-			-				-					-		post+100dpi+nohead	generic		nospool		-			-			-			-
#
# same as above for generating output suitable for 300 dpi.
# 300dpi	-			-				-					-		post+300dpi+nohead	generic		nospool		-			-			-			-
#
# same as above for generating output suitable for 600 dpi.
#
# 600dpi	-			-				-					-		post+600dpi+nohead	generic		nospool		-			-			-			-
#
# same as above for generating output suitable for Linotronics phototypesetter.
# 1270dpi	-			-				-					-		post+lino+nohead	generic		nospool		-			-			-			-