#!/bin/rc
echo -n cpu > /env/service
date > /env/boottime
echo -n plan9 > /env/site

# cs sets /dev/sysname, bind the ether to give cs
# an address to look up
ndb/cs
# configure the swap channel
mount -ct /srv/boot /n/bootesother other
swap /n/bootesother/swap

sysname=`{cat /dev/sysname}
prompt=($sysname^'% ' '	')
switch($sysname){
case kremvax	# big multiprocessor
	NPROC=4
	ip/ipconfig
	ip/rarpd & 	# only needed if you have suns to boot
	ip/tftpd -d & ip/bootp
	/mail/lib/mailcron &
	aux/listen il
	aux/listen tcp
case musca 135.104.9.6	# mips magnum as cpu server and auth server
	sysname=musca
	auth/keyfs -m/mnt/keys /adm/keys
	auth/keyfs -m/mnt/netkeys /adm/netkeys
	ip/ipconfig
	ip/rarpd & 	# only needed if you have suns to boot
	ip/tftpd -d & ip/bootp
	ndb/dns -s
	aux/listen -t /bin/service.auth -d /bin/service dk
	aux/listen -t /bin/service.auth -d /bin/service il
	aux/listen tcp
	aux/listen il
}
date >> /$cputype/log/$sysname
echo -n 'add tcp il udp' > /net/cs

# configure the swap channel and start the pager
# it should be put on a file system that doesn't get backed up to optical disk.
# we do this:
# mount -c /srv/boot /n/nobackup other
# swap /n/nobackup/swap
#
# in the interim, you could try going to unix (see u9fs(4)):
# srv tcp!kremunix!9fs
# mount /srv/tcp!kremunix!9fs /n/kremunix
# swap /n/kremunix/tmp
echo swap not enabled, look at /rc/bin/cpurc