
Date: Fri, 10 Nov 1995 08:08:21 CST
Rope Making

from Scouts-L mail list



Date: Fri, 10 Nov 1995 08:08:21 CST
From: RCOVINGT &lt;rcovingt@CCMAIL.DSCCC.COM&gt;
Subject: Rope Making

Hello,

On Tue, 31 Oct 1995 John Hall requested some information about
making rope.

Earlier this year I requested information from the list on this
very subject. Many Scouters were very helpful. So if I may I would
like to pass back to all the art of making rope.

The primary booklet we used was BSA's &quot;Knots and How to Tie
Them.&quot; It provides an adequate description and diagram for
making the winding tools.

Some building tips for the winder. Make it out of hard wood. After
a few hours of winding the holes become very oversized in pine.
Use 3/16 or 1/4 dia rod for the j-hooks so they won't flex. Rod
threaded on one end with jam nuts and washers is helpful to secure
the common handle on the 3 rods. All you need is boy arm-strong
to make it go.

The machine is made up of two boards at right angles. Make the
winding base very wide, so as to bridge across two saw horses.
This will provide stability when you have 50 to 75 feet of rope
out in front. Use c-clamps to fasten it to the saw horses.

The Y-tool, or spreader that is used to keep the twisted rope
under control also needs to be made from hard wood to prevent
an ear from breaking off.

The rope was made from 'binders twine'. I had to search far for

a feed store that carried it. Here in Dallas, it is not a big
stocking item. It twine comes in a ball about the size of a basketball.
It holds about 5 - 6 pounds for 8 to 10 dollars. I never could
get an answer to how much that was in feet. I would guess about
1000 feet.

Now the good part. Get a couple large plastic buckets, and packs
of common clothing dye, (ie. red, green, yellow, blue, etc. )
Take the bale and let it soak in the dye for a couple of days.
It takes a long time to soak thru the tight windings. Let dry
for a few days also. Use multiple colors.

To set-up the machine. Determine how long you want the finished
rope. Say 50 feet. Take a boy or step ladder and place it 60 to
65 feet away from the machine. The rope shrinks about 20 percent
in length due to the windings. Starting from the boy wind three
times between the boy holder and the machine j-hook, repeat the
process with the same or different color binders twine for each
hook.

Secure the boy end of the rope with an overhand knot to keep the
lengths the same size and so he can hold onto it and keep the
rope taught as the winding process is going on. He will walk in
the 20 percent we talked about earlier. If you want larger diameter
rope, put five loops per j-hook.

As each strand twist clockwise, the lay of the rope twist counter-clockwise.
The packing tool is important for keeping the rope from getting
tangled and packing the lays neatly. Continue the winding process
until you complete the length of the rope.

It is better if you can stretch the rope between two fixed points
with a lot of tension so as to set the lays of the rope. Do a
backsplice or whip the ends of the rope. You can use a candle
to burn off the 'hairy' part or leave it.

It takes alot of boy power, we did it at two all day shows, had
lots of visitors, that remembered they did it once in their youth.
The multi colors on the same rope were an eye catcher. Our Christmas
ropes could be woven into a wreath or ??.

It was fun and a big cost savings for our troop. The rope box
over flows now!

That was a long winded explanation, but hope it helps.

Rick Covington, UC,ASM,MC

T713 / P874
Circle Ten Council
Dallas, Texas
rcovingt@ccmail.dsccc.com


12/08/95
