PAINT
 Graphic AND Text
 Drawing  Program
 by  DAve Stewart

 This program is PUBLIC DOMAIN,
written by me for Club 100, the
Tandy Model 102 (100) club.
 No fees may be charged for this
program.  This program MAY be
freely copied and traded.

  PAINT is a dandy little graphic
(CAD) which has many features found
only on desktop computers.  It'll
run on minimal RAM and is just down
right FUN to use.

  GRAPHIC MODE
  (Num Lock ON)

 The program starts off in GRAPHIC
MODE.  Switching between Graphic
and Text mode is accomplished by
hitting the ESC key.  In Graphic
mode, the cursor is a one pixel
dot.  In Text mode, the cursor is a
non-destructive blinking block.
  Graphic Mode Movement:
        1 2 3      Q W E
        4 5 6      A S D
        7 8 9      Z X C
  Movement is with the Numeric Key
Pad (so turn ON Num Lock).
Movement is in relation to the
five (5).  The 4 is to the left of
the 5, so if you hit 4 the pixel
will move left.
 1 up/left  2 up
 3 up/rt    4 left
 5 not used
 6 right    7 dn/left
 8 down     9 dn/right

  The QWE
      ASD
      ZXC keys move the cursor TO
the corresponding area of the
screen.  Q moves the cursor TO the
top left of the screen.  W to the
top middle, E to the top right, A
to the left middle, S to center
screen, D to right center, z to
bottom left, x to bottom center,
and C to bottom right.


  Drawing SQUARES, BOXES, AND LINES

  Move the pixel where you want the
1st corner of the block or 1st end
of the line.  Press F1 to lock it.
You'll hear an audible tone.
  Move the pixel where you want the
2nd corner of the block or 2nd end
of the line.  Press F2 to lock it.
  Then:
    F3 = draw line
    F4 = erase line
    F5 = draw UNfilled Box
    F6 = erases UNfilled Box
    F7 = FILLED Box
    F8 = erases FILLED Box

  The STEP or number of movements
of the cursor when you press the
numeric movement keys can be
changed in the GRAPHIC mode by
pressing the ARROW keys.
  left arrow - decrease by 1
  rght arrow - increase by 1
  up arrow   - increase by 10
  down arrow - decrease by 10
  Minimum is 1, max is 20 pixels
per move.

  To ERASE set the left & right
corners (F1 & F2) and then F8.

  TEXT MODE INSTRUCTIONS
  (Num Lock OFFO

Hit ESC to switch back and forth
from text to graphic.

  Turn OFF the Num Lock when in
Text Mode.  Movement has now
changed.  Movement is according to
the ARROW keys.  Up is up, left is
left, etc.
  Arrows move NON-destructively.
Entering text or Graphic Characters
places them where the cursor is.
You MAY use the code & graph keys
to print All pre-made graphic
Pictures.
  F1 is NORMAL video
  F2 is INVERSE video

In the Graphic Mode I did not use
the 5 or 0 movemnt keys.  I may add
circles to the 0 key and something
else later.  If so, I'll publish
the new line(s).
  F3-F8 are unused in the Text
Mode, reserved for future editions
too!

  I hope that you find this program
enjoyable.
  DAve Stewart