Control Omron PLCs in the Plant or Laboratory with InnerVIEW and LabVIEW
Software

December 21, 1993 -- Midland, MI- Dateppli announced today its new
InnerVIEW software, a LabVIEW add-on product, that links Windows-based PCs
to Omron PLCs. Using InnerVIEW, process engineers and systems integrators
can combine the control capabilities of Omron PLCs with the proven data
acquisition (DAQ) capabilities of LabVIEW graphical instrumentation
software to build completely integrated systems for use in laboratory
automation and plant-wide control applications. Dateppli is a member of
the National Instruments Alliance Program.

InnerVIEW turns a Windows-based PC into the operator station of a data
acquisition and control system by combining the speed and dependability of
Omron PLCs with the power and flexibility of LabVIEW. InnerVIEW gives a PC
direct communication to an Omron PLC through the PC serial port. With
InnerVIEW, users take advantage of the LabVIEW graphical user interface
(GUI) and custom process graphics to display or modify current system
parameters. System operators can build alarm structures, create logging
routines, or download set points, run profiles, and alarm information to
the PLC using LabVIEW. Users can easily acquire data from the PLC or a
plug-in DAQ board and process it in LabVIEW.

InnerVIEW requires a 486 PC or higher with 8 MB RAM; Microsoft Windows 3.1
or later, and LabVIEW Version 3.0 or later.

InnerVIEW is available now from Dateppli for $595. For more information
please contact Dateppli, 1001 East Carpenter Street, Midland, MI 48640,
(517) 839-1040. Fax: (517) 839-1042. LabVIEW is available now from
National Instruments for $1,995. For more information please contact
National Instruments, 6504 Bridge Point Parkway, Austin, TX 78730-5039,
(512) 794-0100. Or call toll free in the U.S. and Canada at (800)
433-3488. Fax: (512) 794-8411.

 ============================================================
 From the  'New Product Information'  Electronic News Service
 ============================================================
 This information was processed from data provided by the
 above mentioned company. For additional details, contact 
 the company at the address or telephone number indicated.
 OmniPage Pro is now used for converting all printed input! 
 ============================================================
 All submissions for this service should be addressed to:
 BAKER ENTERPRISES,  20 Ferro Dr,  Sewell, NJ  08080  U.S.A.
 Email: RBakerPC (AOL/Delphi), rbakerpc@delphi.com (Internet)
 ============================================================
