Help, xrandr is only allowing the maximum resolution of my display. reddit / freebsd ---------------------------------------------------------------------- WoomyUnitedToday · 2023-06-22 18:28 My display is currently running at a resolution of 1280x960, but it’s hard to read at that resolution, so I’d like to change it to 1152x864, however, xrandr -s 1024x768 results in “Size 1152x864 not found in available modes” It should probably be noted that the display is a CRT, and xrandr works fine on my other computer (which has an LCD and runs Arch Linux) It’s an eMac, so I don’t know how the display is internally connected. Officially supported resolutions of the display: 640 by 480 pixels at 138Hz, 800 by 600 pixels at 112Hz, 1024 by 768 pixels at 89Hz, 1152 by 864 pixels at 80Hz, and 1280 by 960 pixels at 72Hz ---------------------------------------------------------------------- thatguyrenic · 2023-06-22 20:00 If the display only supports that resolution, you may need to adjust xorg's dpi instead of the resolution. ---------------------------------------------------------------------- WoomyUnitedToday · 2023-06-22 20:36 The display does not only support that resolution, and it’s not the dpi that makes it hard to read, it’s the refresh rate at that resolution that makes it look weird to look at. 1152x864 is the resolution I’ve always used on this computer ---------------------------------------------------------------------- MermelND · 2023-06-22 22:18 You might have to generate modelines for the resolutions you like to use and add them to an xorg.conf.d file ([https://docs.freebsd.org/en/ books/handbook/x11/#x- config](https://docs.freebsd.org/en/books/handbook/x11/#x-config)). Search for x11 modelines with the search tool of your choice and fit it with the information you find in the link above. Maybe this gets you in the right direction, and Im sorry that I cannot remember enough of that stuff to help you directly. ​ I do remember evil dark arts and witchery are laying ahead of you if modelines are the issue ;) ---------------------------------------------------------------------- equ_0x0DAF · 2023-06-22 23:35 Try with settings in the `/boot/loader.conf` and then xrandr or your DE Display Configuration ​ `efi_max_resolution="1152x864"` `vbe_max_resolution="1152x864"` `kern.vty=vt` `kern.vt.fb.default.mode="1152x864"`