Unable to boot usb install medium on Dell XPS 13 7390 reddit / freebsd ---------------------------------------------------------------------- NL_Gray-Fox · 2022-11-22 13:24 Hi, I'm trying to install FreeBSD on my Dell XPS 13 7390, it's been running Debian for a few years now and I finally wanted to give BSD a try. Thing is I cannot seem to boot at all, the USB drive does not show up in the BIOS. For reference this is what I used to dump the image; \`xzcat FreeBSD-13.1-RELEASE-amd64-memstick.img.xz | dd of=/dev/sdc bs=1M conv=sync status=progress; sync\` ​ Checked; * sha512 which matches * Disabled SecureBoot * USB stick works fine with Debian. ---------------------------------------------------------------------- timvandijknl · 2022-11-22 14:21 It helps if you unzip the .XZ file first and THEN disk-dump it onto USB. Using pipes with this stuff doesn't always work. ---------------------------------------------------------------------- NL_Gray-Fox · 2022-11-22 14:42 Hmm, Ok will try. ---------------------------------------------------------------------- rykolepl · 2022-11-22 18:26 Does this usb stick prepared this way work in other machine? ---------------------------------------------------------------------- sedlaceksbd · 2022-11-22 19:08 I had the same issue on my Thinkpad. I switched to legacy boot and it worked. Probably not the correct answer but worked for me ---------------------------------------------------------------------- HCharlesB · 2022-11-22 20:41 Have you tried all of the USB ports? When my XPS 1 9370 was new, it could boot from any of three USB ports. After multiple BIOS upgrades it only boots from the one on the right. ---------------------------------------------------------------------- akapulko53 · 2022-11-27 05:42 Read my [tips](https://github.com/click0/FreeBSD-install-scripts). In your case, the optimal strategy would be: >there is Linux installed ==> then via GRUB, ISO MfsBSD, kFreeBSD Booting into [MfsBSD](https://mfsbsd.vx.sk/) you can do it yourself: 1. write the desired image to the HDD. 2. use the zfsinstall script to install the desired version of FreeBSD 3. using another self-written script, install the desired version of FreeBSD ---------------------------------------------------------------------- NL_Gray-Fox · 2022-11-27 06:09 Thanks you guys I fixed the issue, just need to check what actually fixed it because I did multiple changes at once and now I'm on vacation. ---------------------------------------------------------------------- NL_Gray-Fox · 2022-11-27 06:10 I'll have a look when I'm back.