installing FreeBSD iso DVD on MacBook reddit / freebsd ---------------------------------------------------------------------- Ok-Resolution8566 · 2022-06-11 16:29 Having some issues installing the 13.1 iso from a burned DVD on my 2012 MacBook. I formatted the SSD, but the disk isn't showing as an option at boot. When I do a recovery, the DVD with the 13.1 iso shows up listed beside my SSD, so it is reading. Could anyone assist? Every instruction I am seeing is either USB only or that "it just works"... ---------------------------------------------------------------------- jloc0 · 2022-06-11 18:15 Not sure on dvd drive personally as I’ve ripped mine out and replaced with an extra ssd years ago. But if writing to usb it needs to have gpt instead of mbr or else the machine won’t boot it. The Mac EFI loader is also seriously limited, but fbsd 13.1 does install and boot (from usb installer at least). You won’t have wifi though, and while Linux drivers exist, they don’t on fbsd. Any wifi dongle I tried also crashed and burned, so I do hope you have Ethernet available or maybe a dongle that’s supported. TBH, fbsd isn’t well supported on the machine sadly. ---------------------------------------------------------------------- rootweiler_fr · 2022-06-12 09:49 Why using a DVD whereas writing FreeBSD iso directly on an USB key works and is much faster to install from? To make a bootable USB key from a shell on Mac OS X (wipe the USB key, replace /dev/da0 to the correct dev entry of the USB key. Use 'diskutil list' to find it): dd if=FreeBSD-13.1-RELEASE-amd64-dvd1.iso of=/dev/da0 bs=1m conv=sync Then boot on the efi bootloader by holding the option key and select the USB key. ---------------------------------------------------------------------- grahamperrin · 2022-06-19 02:16 > … the disk isn't showing as an option at boot. … Instead of Apple's Startup Manager, try the **C** key at startup.