Installing a new operating system using DD? reddit / freebsd ---------------------------------------------------------------------- [deleted] · 2020-08-07 01:35 [deleted] ---------------------------------------------------------------------- wobbly-cheese · 2020-08-07 01:49 no for iso format, maybe for img though. thats how i load boot usb drives ---------------------------------------------------------------------- dddddavidddd · 2020-08-07 02:09 If you're trying to install FreeBSD onto another disk from FreeBSD without booting from install media, you could format and partition the destination disk and extract the [release files](https://download.freebsd.org/ftp/releases/amd64/12.1-RELEASE/) (base.txz, kernel.txz) to the root partition. You'll also need to install the bootloader yourself, and add a corresponding UEFI boot entry with `efibootmgr` unless you're using MBR boot. [This guide](http://wiki.euserv.de/index.php/Manual_Installation_FreeBSD/en) is a bit dated but covers the general process of installing manually. Just skip booting from live media and adapt as needed for your situation. However, from your post, are you sure you want to install to `/dev/ada0`? This is usually the disk that you'd be currently booting / running your live operating system from. In Linux this would often correspond to `/dev/sda`. ---------------------------------------------------------------------- Quasimo_to · 2020-08-07 04:44 I'm trying to install a Linux distro over FreeBSD. Unfortunately FreeBSD doesn't support a few things that I'm trying to use, so I want to go back to linux. I'm trying to install it to /dev/ada1, which would be my SSD I believe. ---------------------------------------------------------------------- [deleted] · 2020-08-07 07:28 What error do you get ? And you can use `sudo gpart show` to list all the storage devices present. Storage devices can also appear as `daX` instead of `adaX`, so YMMV. ---------------------------------------------------------------------- FUZxxl · 2020-08-07 09:30 What error do you get? “I get an error” is not an error description and is not useful for diagnosing the problem. ---------------------------------------------------------------------- Quasimo_to · 2020-08-07 09:30 operation not permitted ---------------------------------------------------------------------- FUZxxl · 2020-08-07 09:33 Is `/dev/ada1` mounted? Are you doing this as root? What sector size have you configured? What is the exact, complete error message (operation not permitted is not the complete error message)? ---------------------------------------------------------------------- Quasimo_to · 2020-08-07 09:34 That's the entire error message I get. I'm doing this as root, and yes /dev/ada1 is mounted. ---------------------------------------------------------------------- FUZxxl · 2020-08-07 09:35 Please post the exact command you type and the complete output of that command. If you use `dd`, there should be more output and more error message than just that. Note that the operating system may prevent you from overwriting a mounted disk. To fix this, first unmount `/dev/ada1` before overwriting it. ---------------------------------------------------------------------- Quasimo_to · 2020-08-07 09:40 Ok, ill get back 2 you in a minute. Unmounting the drive seems promising ---------------------------------------------------------------------- FUZxxl · 2020-08-07 09:41 It might also be the size of the write, but I can't tell without seeing the complete error message and exact command you type. ---------------------------------------------------------------------- Quasimo_to · 2020-08-07 09:47 So after unmounting and remounting it appears to have successfully burned the iso to the drive? I'll try booting into my install and seeing what happens. ---------------------------------------------------------------------- FUZxxl · 2020-08-07 09:59 Sounds good! ---------------------------------------------------------------------- electrobrains · 2020-08-07 11:40 Stop doing weird stuff and just boot from thumb drives or DVD-R.