Final question: FreeBSD or DragonFlyBSD reddit / BSD ---------------------------------------------------------------------- [deleted] · 2021-02-16 20:49 3rd and final question. FreeBSD or DragonFlyBSD? I heard that DragonFlyBSD has better performance and I'm really interesting in it's hybrid kernel. Have anyone tried both of them and can tell me a word or two? After that post I'm jumping in the BSD word! ---------------------------------------------------------------------- gnemmi · 2021-02-16 22:00 I used FreeBSD for a long time, and even got to be freebsdmall subscriber ... until I switched to Dragonfly. Never looked back ... I can tell you that much. ---------------------------------------------------------------------- [deleted] · 2021-02-16 23:20 DragonFly is cooler. FreeBSD is probably the easier path, however. DragonFly is AMD64 only: no i386, no ARM of any kind, no MIPS, no nothing. FreeBSD has ARM ports and also runs on many other architectures (although not as many as NetBSD, of course ;) ) ---------------------------------------------------------------------- ctisred · 2021-02-17 03:06 DragonFly feels 'cleaner' (since they have put alot of work into this) at the expense of being more 'research OS'-like - still stable, but might need to tweak/port software a bit more if you are using uncommon things, FreeBSD feels a bit crustier but much more will 'just work' in terms of applications available. I'd try them both out - an interesting exercise to see how they have diverged since FreeBSD 4. This is ignoring the hardware platforms since others have covered that. Beyond this, there are differences in what's available - ZFS vs HAMMER, Bhyve vs VKernels, etc. ---------------------------------------------------------------------- mayhem8 · 2021-02-17 04:22 What are you planning to use it for? ---------------------------------------------------------------------- [deleted] · 2021-02-17 05:37 Can you tell me about things that were objectively (well nothing can be 100% objectively but still) better? Also what about software support and availability? ---------------------------------------------------------------------- [deleted] · 2021-02-17 05:39 Definition of "being cooler" please! Is it objectively better in some things? Does it have more and more up-to-date software? Is it more minimalist etc.? ---------------------------------------------------------------------- [deleted] · 2021-02-17 05:40 Great info! Have personally found and performance deference? Even a small one ---------------------------------------------------------------------- [deleted] · 2021-02-17 05:44 Mostly programming with Neovim, browsing (I'm currently using Firefox). I plan to use the Godot Engine when the 4.0 version releases to create video games. I may also use some video and photo editing. No AAA gaming tho and no things like bloated (gnome, kde) desktop environments or big bloated software (rather then the ones I said I need) ---------------------------------------------------------------------- [deleted] · 2021-02-17 05:52 Well, honestly I am not going to write a whole essay about it and I have not really used it myself, but it is more innovative than FreeBSD (although still far from bleeding edge in OS design) and more of a research project. It has a hybrid kernel as you already know, it has its own modern file system, it focuses on good SMP performance, Dillon loves Ryzen and makes sure it runs well on his Threadripper and it has good support for modern technology like nvme. There is probably way more. You will have to do some additional research if you want more in-depth information. I think you can look up the versions of packages in dports you care about yourself online. ---------------------------------------------------------------------- [deleted] · 2021-02-17 06:01 Thanks a lot, your comment really really helped! I love the fact that they care about Ryzen and nvme and that they have hammer2 ;) I wish you to have an amazing day my friend! ---------------------------------------------------------------------- qci · 2021-02-17 06:13 FreeBSD is virtually amd64-only, too. Everything else is tier 2 or 4. ---------------------------------------------------------------------- [deleted] · 2021-02-17 07:09 Thanks! ---------------------------------------------------------------------- kristopolous · 2021-02-17 09:49 Freebsd had some major changes almost 20 years ago now. Imho it made it much more broken for long lived installs. Ports update, version upgrade, it all became increasingly difficult. It's always been smooth with dragonfly. And to preemptively respond, I don't remember the exact technical hiccups from 10-15 or so years ago that made such things unpleasant and addressing it now, in this forum isn't really relevant. I only remember it was a time consuming pain. It also may no longer be the case. I've got nothing bad to say about it, it was just a pita to upgrade at times. Used it for 15 years ---------------------------------------------------------------------- [deleted] · 2021-02-17 10:03 Thank a lot for your comment! I have already decided to try them both! Have a mice day my friend! ---------------------------------------------------------------------- FUZxxl · 2021-02-17 10:33 That's completely wrong. First of all, Tier 2 doesn't mean it's not supported and second, both i386 and AArch64 are Tier 1, too. ---------------------------------------------------------------------- ranadoo31 · 2021-02-17 10:46 As a 17 year user of FreeBSD, I have no clue what he's talking about that's relevant to anything today or the past decade and more. ---------------------------------------------------------------------- [deleted] · 2021-02-17 11:01 It's fine, I'll try it myself anyway. Thanks a lot! ---------------------------------------------------------------------- daemonpenguin · 2021-02-17 11:36 The two main differences you will probably notice are hardware support (FreeBSD runs on more CPUs) and filesystems. DragonFly uses HAMMER/HAMMER2 while FreeBSD usually runs ZFS or sometimes UFS in lower resource situations. FreeBSD is more popular and you'll find support for it easier. DragonFly probably only makes sense if you really need HAMMER for something. Chances are if you're asking "which should I use?" the answer is FreeBSD. ---------------------------------------------------------------------- [deleted] · 2021-02-17 11:40 Thanks a lot for everything! Have a nice day! ---------------------------------------------------------------------- qci · 2021-02-17 11:52 https://www.freebsd.org/platforms/ i386 was demoted to tier 2 recently. ---------------------------------------------------------------------- FUZxxl · 2021-02-17 11:55 I am aware. So it is still Tier 1 for all stable FreeBSD versions currently out there. ---------------------------------------------------------------------- goldfluss · 2021-02-17 12:05 The only problem in my opinion is the lack of proprietary driver (Nvidia) under DfBSD. Hammer2FS seems to be great and the hybrid kernel architecture is probably the best in long term. ---------------------------------------------------------------------- [deleted] · 2021-02-17 12:09 Can you tell my more about the architect? It seems interesting but draginfly uses more CPU and WAY more ram (430mb vs 50mb) than AlpineLinux and even freeBSD so I really wonder why is that. Make the productive kernel that ships with the distro is very bloated ans you can build your own tiny custom one? ---------------------------------------------------------------------- goldfluss · 2021-02-17 12:14 All my systems are running with intel and Nvidia, so I have no experience with dragonfly. One day I will install it, when I have a full AMD system. DragonflyBSD got my attention years back, but the lack of drivers kept me from installing it ... ---------------------------------------------------------------------- goldfluss · 2021-02-17 12:17 You can configure and make the kernel to the hardware configuration you have and the modules you want to be part of the system: [Custom Kernel Documentation](https://docs.freebsd.org/en_US.ISO8859- 1/books/handbook/kernelconfig-building.html). This should work on DragonflyBSD too I think. ---------------------------------------------------------------------- [deleted] · 2021-02-17 12:54 Oh ok, makes sense! Have a nice day! ---------------------------------------------------------------------- djc_tech · 2021-02-17 13:20 This is your final question...you're not allowed to ask other questions now...or forever! ​ FreeBSD is my choice but honestly up to you. I like ZFS, I like the amount of software and stability. The community is large and questions are usually already answered. ​ I tried Dragonfly it just wasn't for me - but that doesn't mean it isn't for you. ---------------------------------------------------------------------- Xerxero · 2021-02-17 13:33 With binary updates in base and pkg it's hardly time consuming. release 5-6-7 were problematic what I recall but hasn't been for the last couple of releases. ---------------------------------------------------------------------- [deleted] · 2021-02-17 13:42 Could you explain your "feelings" please? What made you felt that you didn't like? Ideology reasons or something that you personally didn't liked? For example DFBSD uses about 430mb (vm) and freeBSD about 93mb which is something that bothers me a lot... ---------------------------------------------------------------------- malenkydroog · 2021-02-17 13:50 About 20 years ago was when Matt Dillon first split DragonflyBSD from FreeBSD; as I recall at the time, it was mainly over disagreement in how FreeBSD planned to try to handle SMP moving forward. Perhaps that is the major change you're thinking of? ---------------------------------------------------------------------- razirazo · 2021-02-17 15:56 If you have to ask, go FreeBSD. ---------------------------------------------------------------------- ctisred · 2021-02-17 16:13 I didn't benchmark and haven't been actively using either for a time (flipped most of my my BSD usage to OpenBSD), but at the time DragonFly was definitely faster by a good amount. I think the gap has narrowed since then since DragonFly has optimized quite a bit of what is possible leaving time for FreeBSD to catch up on things that it hadn't yet, but not 100%. Architecturally, the DragonFly direction seems more scalable, but again, I haven't followed that closely on either side in the last few years. Hammer, though not having exactly the same features as ZFS, is definitely much more lightweight in terms of resource requirements (RAM). ---------------------------------------------------------------------- [deleted] · 2021-02-17 19:23 Is it more beginner friendly? ---------------------------------------------------------------------- [deleted] · 2021-02-17 19:26 Hammer2 is more lightweight but then how you explain freeBSD using 93mb and DragonFly using 430mb? It's really really weird... ---------------------------------------------------------------------- djc_tech · 2021-02-17 19:37 OpenBSD uses even less. I like the BSD community. I like the way the system is laid out and designed. I like ZFS, I like package management system. I tried DFBSD and I found it equivalent of OBSD in terms of usability and package features ---------------------------------------------------------------------- [deleted] · 2021-02-18 09:09 Actually, I also found OpenBSD having the package I want (gtkmm4) so It really got my attention from the beginning. But I heard that it has worse performance than freeBSD so that kept me away. I wonder if it has worse performance than Alpine Linux tho. ---------------------------------------------------------------------- stompbixby · 2021-02-19 07:39 use linux instead ---------------------------------------------------------------------- 0mark · 2021-02-20 09:33 Why?