X86 bsd router suggestions reddit / BSD ---------------------------------------------------------------------- anoduck · 2020-12-17 04:45 Recently OPNsense chose to no longer support the x86 architecture, which sucks. I don't care to swap out my current box, since there is nothing wrong with it. The entire reason for using OPNsense was because it allowed one to take an old box and turn it into a router. So now I am looking at just creating a system from the ground up to use as a router. So I am looking for a micro kernel or standard to do this. Is nanoBSD still under development? If so, does it support PF? I was able to get an installation of netbsd down to a miniscule size, smaller than my attempt with OpenBSD. Does anyone have experience with netBSD's npf? Are there any other micro platforms I am missing? ---------------------------------------------------------------------- akp55 · 2020-12-17 08:20 What the hell are you talking about? You mean they decided to stop supporting 32bit x86 systems? You can buy a used 64bit system and probably save money on power. ---------------------------------------------------------------------- anoduck · 2020-12-17 12:02 The problematic word is "buy". Why would I want to buy anything if my old single core x86 32bit is working fine? My power bill is nominal anyways, since I heat my home with firewood. Now if you have a 64bit dual core you wanna donate, I am much thankful. ---------------------------------------------------------------------- one-without-zero · 2020-12-17 12:44 You could just run FreeBSD, AFAIK it still runs fine on i386. Or see if pfsense still supports it, I’ve not looked at them in ages. ---------------------------------------------------------------------- vivekkhera · 2020-12-17 15:50 Current version of pfsense js 64bit only. ---------------------------------------------------------------------- [deleted] · 2020-12-17 17:08 [removed] ---------------------------------------------------------------------- anoduck · 2020-12-17 19:39 [PF based router wares](https://i.imgur.com/4G6ivYh.png) ---------------------------------------------------------------------- anoduck · 2020-12-17 19:40 Yeah, that is why I was considering nanobsd. ---------------------------------------------------------------------- perciva · 2020-12-18 02:47 Be nice. ---------------------------------------------------------------------- anoduck · 2020-12-18 02:48 Thank you. ---------------------------------------------------------------------- the_big_tech · 2020-12-21 02:45 OpenBSD still supports [i386](https://www.openbsd.org/faq/faq4.html) and has an [official guide](https://www.openbsd.org/faq/pf/example1.html) for making a simple router and there is this [unofficial guide](http://openbsdrouterguide.net/) as well. ---------------------------------------------------------------------- olevole · 2020-12-26 15:29 [BSDRP](https://github.com/ocochard/BSDRP) supports i386 architecture and the project is well supported ---------------------------------------------------------------------- jeojet · 2020-12-27 02:54 Might check out http://www.smallwall.org/ or http://www.t1n1wall.com/ -- both forks of the no-longer active M0n0wall project ( https://m0n0.ch/wall/index.php ). FreeBSD based. Might be fine if you're not needing high performance. ---------------------------------------------------------------------- edparadox · 2020-12-31 23:25 >Recently OPNsense chose to no longer support the x86 architecture, which sucks. Source? Edit: Sorry, failed to notice you meant i386. ---------------------------------------------------------------------- johnklos · 2021-01-05 16:24 NetBSD's npf was a bit hairy when it was new, but now that it has had a few years to mature, it's quite good and very performant. Give it a go. NetBSD can support anything from the 80486 and up (the 80386 doesn't have certain atomic instructions). ---------------------------------------------------------------------- anoduck · 2021-02-18 01:28 Ya know, I just might. I greatly appreciate the response. Although it has been a few years, the times I have used netbsd have been nearly religious experiences for me. It is such a quality built OS that is incredibly flexible. You can build a quality system under 512mb, something you can't do with every OS, OpenBSD being one of them. ---------------------------------------------------------------------- anoduck · 2021-02-18 01:37 Yeah, I use the wrong label for the architecture. I apologize. Whether you intended to suggest I could use OPNsense's source code to cut my own distribution, or not, it is a good suggestion, and one I am considering. I could use hardenedBSD and pull the OPNsense framework from the source code, and it should run fine. I would just have to keep up with pulling from source to stay updated, but as long as the framework runs php the architecture d should not matter. ---------------------------------------------------------------------- anoduck · 2021-02-18 01:49 OpenBSD is my daily driver and my go to for nearly everything. I didn't use it for my router due to the speed and downtime my network would go through. I thought about configuring as much as I could using vmd, and then cut an iso as a distro. I just not quite sure how much I could configure in advance and how smooth the transition would be. ---------------------------------------------------------------------- anoduck · 2021-02-18 01:51 Thanks for the link. It looks like a viable solution for what I was looking for. ---------------------------------------------------------------------- anoduck · 2021-02-18 01:53 Sweetness, exactly what I was hoping. Revert back to the lighter weight of the monowall, with stability maintained. Thanks! ---------------------------------------------------------------------- the_big_tech · 2021-02-18 14:50 I created an Ansible playbook to run against my OpenBSD system after install. It wouldn’t be zero downtime, but at least you wouldn’t need to fiddle with it once you have the Ansible configuration locked down. ---------------------------------------------------------------------- anoduck · 2021-03-22 04:31 I haven't worked with ansible at all as of yet. If I remember correctly, I had difficulty installing it on one of my systems, either on alpine Linux or the openbsd, but this was over 4 years ago in the least. I will check it out. ---------------------------------------------------------------------- anoduck · 2021-03-22 04:37 Do you know if I could get OpenBSD to connect to a Mifi and use it as WAN? ---------------------------------------------------------------------- the_big_tech · 2021-03-23 12:10 In theory it should work. MiFi just acts as a gateway connected to 4G, so anything on the other side should be normal IP. ---------------------------------------------------------------------- anoduck · 2021-05-30 04:42 i386 images of BSDRP are not longer available. :(