Learning to update Debian BSD 8 by source code. reddit / BSD ---------------------------------------------------------------------- Kmetadata · 2018-12-22 09:06 I am wanting to be able to make packages from source code. I have tried the Debian foums and they have not been of any use. I am looking for help in how to do this. As for my experiance with source code it is not much. I have compiled three programs for linux. I have used source compiles on package managers for OSX. So it is not much. As for why it is because the distro I am using does not have many packages. I am looking mostly for updates to packages, drivers, and games that mostly are emulators. The distro I am using is Debian BSD 8. Debain made a BSD version that lasted up to Jessie aka Debian 8. I found the latest version to be Debian 8 BSD RC 3 for both 32bit and 64bit. The defualt repo's that come with the ISO's don't work. That means you have to use the ones on the web site. Out side of the ones on the one Debian mirrors page no other mirrors or repos work. I tried the multimida repos and it does not work. I tried to use ppa's and none of those work ether. I know that there are no other repo's exist out here do to the changes made by Debian/kfreebsd 8 Jessie. I tried the ppa scr method and it did not work. Then I dried using Gdebi and it does not work ether. This is because it is based on K/freebsd and there are changes. While the architechure is for the x86 cpu becuase of these debs and binarys don't work. For example I like to be able to update XFCE to version 4.12. The latest version is 4.13 and 4.14 and they are only for Ubuntu 18.04/Debiain 9. I have used 4.12 on Ubuntu 16.04 and it is quite nice. The main issue is that this verson on Debian BSD 8 is super out of date and could be causing some GTK issues I am having with some of the programs I want to install. I am using Linux Mint 18 as my main system. The reason is it just works right now. I tried Debian BSD 8 on my laptop. While it boots it does not finish installing. This is because the system uses the kernel of FreeBSD 10. The current version of FreeBSD is version 12. The laptop is HPStream PC that came out in 2014. It works on Linux Mint 17.2 and 17.3, but not 17.1. It is most likly do to drivers. I wan't to be able to get the distro to run on my hardware. That is why building the kernel is some thing else on the list. I also need support for my Xbox 360 controler too. Also it would be nice if I could get the BFS driver or the GD-ROM driver from NetBSD. I am also a gamer and I like emulators. There is VBA-gtk and Higan and nether of them work. VBA-gtk does not run at all. Higan does not have open gl support. I also use VBAm, mGBA, medusa, snes9x, gens- gs, kega-fusion, cen64-qt, [m64.py](https://m64.py/), muppen-qt, ect. Most have debs for Ubuntu and I would like to get them working. As for why I am doing it is because I am stuck. I am not liking where Linux is going at the moment. I also don't like how FreeBSD is going at right now. I am from the Linux Mint side of things as I just want things to work. That does not happen for me with linux or FreeBSD. I also LIKE the idea of a FreeBSD system that has an easy to use binary package installer that does not have to be reinstalled every two years. I don't care about the SystemD debate about how things should be done. I don't have much experiance with compileing. Most things I have compiled ether are part of a package system or they use standard make files. I found out that many devs use this thing called cmake and that Debain users lover it. It is hard for me to understand. i want to be able to compile these programs and make them into deb files so I can ether host them or put them on a DVD. I am on Cmake 3.01 and most programs need at least cmake 3.1 and that means I have to update cmake and there is not update to camke in the repo. I tried to do reasearch on using this program and all the videos are about cmake for programs, but not for compilers. MOST OF THE GUIDS ARE NOT FOR NORMAL PEOPLE. ---------------------------------------------------------------------- Morphing-Jar · 2018-12-22 09:28 This is a weird ass post man. You want stuff to “just work”, *especially including drivers*, and is for “normal people” but you chose a deprecated build of a BSD? ---------------------------------------------------------------------- Kmetadata · 2018-12-22 09:33 The issue is not because of the distro I use as the issues I am having with cmake would still exist on Ubuntu. The thing is unlike Ubuntu I don't have a choice if I WANT knew software. I am the only one out of 200 people using the 64bit version. I know most of those 200 are severs. There are only 30 running the 32bit version. I want to be able to install drivers and on linux we have dkms for that. I think FreeBSD has some thing like that. ---------------------------------------------------------------------- recourse7 · 2018-12-22 11:30 You want your Xbox controller to work. Come on. ---------------------------------------------------------------------- recourse7 · 2018-12-22 11:31 Why?? Why are your doing this to yourself? ---------------------------------------------------------------------- Kmetadata · 2018-12-22 11:37 And people wounder why most people are stupid these days and just work at MC'ds and play halo all dayl I am sick and tired of this naging. ON to the qustion. If the issue with the gui tool is just that it is out of date and you need a newer version then the solution is to update cmake using the source method. I don't want any smark just a yest or no. then I can use that to build a binary after the build of the thing with cmake? Then I can host the files on my local repo and use the [trusted] so I don't have to waste time with gpg keys. AGain I don't want here any thing about my choice. IT is not helping me and just making the air hostile. I LIKE WHAT I LIKE. ---------------------------------------------------------------------- Kmetadata · 2018-12-22 11:40 the driver is not in the repo and it is not the linux driver. I know that freebsd has it's own driver. For that would I follow the guid to make the make files and the the debian one to package it? I am a simple man with simple needs and it is like you are making fun of my dick. ---------------------------------------------------------------------- recourse7 · 2018-12-22 14:12 I feel like this is a prank. ---------------------------------------------------------------------- recourse7 · 2018-12-22 14:13 You made the wrong choice. ---------------------------------------------------------------------- LocalRefuse · 2018-12-22 17:26 I strongly recommend joining a group of people already working on similar things, an OS is a big project. They can help you bridge your knowledge gaps and with other people handling parts you know less well, you'll be able to focus on areas where you are productive. Have you considered GhostBSD or TrueOS? They're also FreeBSD-based and aiming to be user-friendly installations. ---------------------------------------------------------------------- NicheArchitecture · 2018-12-22 17:49 Just use OpenBSD ---------------------------------------------------------------------- LocalRefuse · 2018-12-22 20:50 I feel like I'm watching someone having a manic episode. ---------------------------------------------------------------------- recourse7 · 2018-12-22 20:57 That's most likely more true then not. Op seems to not understand that no one is under any obligation to support his craziness. ---------------------------------------------------------------------- Kmetadata · 2018-12-23 02:28 Yes, but you still have the LTS issue. I am not sure if the Trident thing fixes this by going rolling or not. I don't like Mate or Lummina and I have tested an up to date version. ---------------------------------------------------------------------- ahandle · 2018-12-23 02:42 Cmake isn't the only thing that's hard for you to understand. kfreebsd is *dead*. It's hard to argue that is was ever really *alive*. As tempting as it is to have apt, the project has not only been abandoned, but never matured to the state you assume, which is why you're not finding documentation (GUIDS) or sympathetic users. It's incomplete. *The build and packaging toolchain is hopelessly broken.* Mate, this bird wouldn't "voom" if you put four million volts through it! 'E's bleedin' demised! ---------------------------------------------------------------------- jsalpha2 · 2018-12-23 16:26 I tried Debian BSD ( kfreebsd) Xfce a while back and loved it. If you can get the band back together and an up to date version available, it would be great. By the way, you can put Xfce on TrueOS/Trident, I don't like Lumina either. ---------------------------------------------------------------------- Kmetadata · 2018-12-24 01:56 Have you eve tried Nix for things in user space? ---------------------------------------------------------------------- Kernigh · 2018-12-24 05:05 >For example I like to be able to update XFCE to version 4.12. [Debian sid has xfce 4.12 for kfreebsd-amd64 and kfreebsd-i386.](https://packages.debian.org/sid/xfwm4) >I am on Cmake 3.01 and most programs need at least cmake 3.1 and that means I have to update cmake and there is not update to camke in the repo. [Debian sid has cmake 3.12.3 for kfreebsd-amd64 and kfreebsd-i386.](https://packages.debian.org/sid/cmake) *Normal people don't run Debian sid.* Normal people run a recent release like Debian 9 "stretch". There is no recent release with kfreebsd, so normal people can't run Debian kfreebsd. If you don't want to be a normal person, you can switch to Debian sid and help the Debian developers to fix kfreebsd. *You can't just compile the packages and expect them to work.* You will need to fix broken packages by *editing their code* \-- so you will need to *learn programming languages* like C and shell script. Debian seems to be doing almost no work on kfreebsd, so you may need to do most of the work *by yourself*. ---------------------------------------------------------------------- [deleted] · 2018-12-24 09:23 [deleted] ---------------------------------------------------------------------- s_w_eek · 2018-12-24 09:31 Nah bruv, the problem *is* the distro you (are trying to) use. People are asking you why you are using this so that they can suggest alternatives that will solve your particular needs and are supported. Unsupported OSs are exactly that... unsupported. If a large community drops support for a codebase there is usually a good reason that choice was made. You will probably be unlikely to find people who will help you for this reason. The time and cost involved in supporting an abandoned OS is not worth it to most companies, let alone a single individual. The system you are running is out of date and likely has unpatched security bugs. For your own sake and sanity you should really try and find a more modern (supported) solution for whatever it is you are trying to do. That being said, I have no idea what "LTS problem" you are talking about. FreeBSD has 5+ years of support with each major release. Yes minor versions expire when a new one comes out, but that doesn't require a reinstall and nothing in the way of major features change. I don't know what the other BSD support cycles look like offhand, but I would expect them to be somewhat similar in length. I believe the core of you post is talking about modifying part of the toolchain on the OS (cmake). The short answer is no, you likely cannot manually update one part of the toolchain and not have more problems than you started with. You would need to do the whole toolchain together. Here is a link with information to help you learn the basics of toolchains. https://elinux.org/Toolchains You won't see toolchain problems like this on an OS that is maintained. ;) edit: formatting