AskBerklit: BSD on Sun Sunblade 100 (SPARC) reddit / BSD ---------------------------------------------------------------------- 0x2a · 2009-08-05 22:54 I have a pretty old, unused Sunblade 100 at home which I'd like to use to play MP3s in a remote corner of my home. It has only 128 MB RAM and was terribly slow with Solaris 9 already, so my idea is to put BSD on it - which I always wanted to try but have zero experience with. Questions: Which BSD has the best maintained SPARC port according to reddit? Anyone managed to get Sunblade 100 audio running? A quick search only revealed [a not really promising freebsd-sparc64 mailing list post](http://lists.freebsd.org/mailman/htdig/freebsd- sparc64/2006-June/004168.html). Thanks alot. ---------------------------------------------------------------------- [deleted] · 2009-08-06 00:29 Have you tried NetBSD? Sun Blade 100 Systems CPU-specific support for the Sun Blade 100 systems was written by Eduardo Horvath. Supported Hardware The Sun Blade 100 is a low-end low-cost PCI-based single processor workstation from Sun Microsystems, Inc. Sun Blade 100 systems include the following hardware: * UltraSPARC IIe CPU * Built-in PCI GEM (ERI) 10/100 network interface * Built-in PCI-IDE controller * One PC-AT style `com' serial port * Four USB ports for keyboard and mouse * Floppy drive controller * One autri audio device * One PC-AT style parallel port * ATI Mach64 frame buffer * One firewire controller with two connectors * One smart card reader * Three PCI slots Known Bugs for the Sun Blade 100 port * The floppy drive is not yet supported. * The smart card reader is not yet supported. ---------------------------------------------------------------------- deadbob · 2009-08-06 02:14 NetBSD ---------------------------------------------------------------------- ggyy · 2009-08-06 05:06 FreeBSD on Blade100 also works well, You can try latest 7.2R. ---------------------------------------------------------------------- milosn · 2009-08-06 08:22 NetBSD++ ---------------------------------------------------------------------- chneukirchen · 2009-08-06 13:19 Ok, I got one and set it up last week (mine has 512 MB RAM, though)... my experiences: NetBSD 5.0 didn't even boot... the boot CD kernel crashes pretty early. OpenBSD 4.5 installed nicely and needs no fuzzing. Audio should be supported, but I didn't try that yet, should be standard ac97. My primary problems are the graphics devices, the on-board ATI Rage64 only gives me 800x600 pixels at 24bit, and the Expert3D-Lite (PCI) doesn't have real drivers, so I can run it only with 7bit(!) X-on- framebuffer, but on high resolutions. I did not try FreeBSD. ---------------------------------------------------------------------- [deleted] · 2009-08-06 14:53 We use OpenBSD on our Sun Blade 100's and 150's, we have several setup as firewall/load balancers. I'm not 100% on the audio, but I will see about setting one up and see how it goes. ---------------------------------------------------------------------- 0x2a · 2009-08-06 17:25 **OP UPDATE** Thanks for your opinions, recommendations from posters so far: * 1 x Free * 2 x Open * 3 x Net, but also one installer crash report I've actually already installed FreeBSD 7.2-RELEASE before all the voices for NetBSD came in. It works, but I didn't get to configure audio and X11 so far. The 7.2-RELEASE does not include precompiled SPARC packages in the expected location, and it took me quite long to [find them](ftp://ftp.freebsd.org/pub/FreeBSD/ports/sparc64/packages- 7-stable/Latest/) and learn about $PACKAGESITE etc. Using ports is not a viable option for a 500 Mhz UltraSparc, compiling ZSH + dependencies took several hours. I'll see how it goes and then maybe try also Open- and NetBSD on other disks. Generally, I'm surprised how snappy interactive usage feels (shell via SSH), it's way better than any Solaris I had on the box before. Also, this is seriously cool: [root@ds9000 ~]# morse sos di di dit dah dah dah di di dit ---------------------------------------------------------------------- 0x2a · 2009-08-06 17:28 Thanks, that would be really cool. As a side project, you could then monitor your firewall logs and rickroll the operators whenever a packet is dropped :) ---------------------------------------------------------------------- ninevolt · 2009-08-06 17:58 Find some RAM on eBay or the like-- it'll be the best thing you ever do for that poor little Blade 100. I'm getting rid of both my Blade 100s soonish-- they've served me very well. ---------------------------------------------------------------------- 0x2a · 2009-08-07 18:02 Do you speak from personal experience and do you have working sound? I've added the t4dwave driver, but dmesg says: pcm0: port 0x900-0x9ff mem 0x424000-0x424fff at device 8.0 on pci0 pcm0: pcm0: [GIANT-LOCKED] pcm0: [ITHREAD] pcm0: chn_init(pcm0:record:dsp0.r0) failed: err = 19 pcm0: pcm_chn_create(trrchan, -1, 0xfffff80001370800) failed pcm0: chn_init(pcm0:play:dsp0.p0) failed: err = 19 pcm0: pcm_chn_create(trpchan, 1, 0xfffff80001370800) failed pciconf: pcm0@pci0:0:8:0: class=0x040100 card=0x545110b9 chip=0x545110b9 rev=0x01 hdr=0x00 vendor = 'Acer Labs Incorporated (ALi/ULi)' device = 'ALI M5451 PCI AC-Link Controller Audio Device' class = multimedia subclass = audio Edit: I'm also inquiring about this on the freebsd-sparc64 mailing list. ---------------------------------------------------------------------- neoice · 2009-09-14 18:12 second on OpenBSD. I run it on an Ultra5. I tried to install Debian first, but ncurses was too slow on 333MHz.