Tutorial: Developing STM32F1 Programs with FPC/Lazarus/STLINK in Linux(Detailed) lazarus / 68-Other OS ---------------------------------------------------------------------- gasensor · 2024-04-08 15:45 1. Install the binutils of C sudo apt-get install binutils-arm-none-eabi 2. connection to prevent the Pascal compiler from finding the path sudo ln -s /usr/bin/arm-none-eabi-as /usr/bin/arm-embedded-as sudo ln -s /usr/bin/arm-none-eabi-ld /usr/bin/arm-embedded-ld sudo ln -s /usr/bin/arm-none-eabi-objcopy /usr/bin/arm-embedded- objcopy 3. Compile Pascal Download and go to the FPC source code directory make all CPU_TARGET=arm OS_TARGET=embedded SUBARCH=armv7m -j$(nproc) PREFIX=/usr NOGDB=1 4. Install Pascal sudo make crossinstall OS_TARGET=embedded CPU_TARGET=arm SUBARCH=armv7m PREFIX=/usr NOGDB=1 5. Establish a connection sudo ln -s /usr/lib/fpc/3.2.2/ppcrossarm /usr/bin/ppcrossarm 6. Testing, for STM32F1 fpc -Parm -Tembedded -Wpstm32f103xb -Cparmv7m  ./test.pas -vut 7. Where Lazarus needs to be set up: "Project"->“Project Options”->"Custom Options" "Custom Option" add line : "-WpSTM32F103XB" "Project"->“Project Options”->"Compiler Options" “Config and Target”:Target OS choose Embedded,CPU choose ARM,Target Processor choose ARMV7M(F4 choose ARMV7EM) “Compilation and Linking”:Optimization Level Choose 0 or 1 “Debugging”:Uncheck “Generate info for the debugger”, If you do not need the online debugging function , Uncheck “Run users the debugger”  and FINISH. If you need the online debugging function, check “Run users the debugger”. Proceed to the next step 8. Install gdb, stlink-gui sudo apt-get install gdb gdb-multiarch stlink-gui 9. Tips for resolving GDB missing Python components sudo rm -rf /usr/share/gdb/python sudo apt update sudo apt install gdb 10. Lazarus Options: "Tools"->"Options"->"Debugger" "Debugger backend": click"Add", "Debugger Type and Path"choose"GNU remote debugger(gdbserver)". command type"gdb-multiarch" “Debugger_Remote_Port”change to “4242” "Debugger_target_Mode"choose“dtTargetExtendedRemote” then click OK 11. Run GDB SERVER: Connect stlink st-util -m 12. Compile and debug There may be imperfections, welcome to point out. Let's improve together.