Does anyone have the idea about Writing XHCI Driver using pascal?
lazarus / 21-General

----------------------------------------------------------------------
TYDQ · 2025-04-22 13:56

My full repository is on https://github.com/TYDQSoft/UEFIPascalOS.
These days I code an XHCI Driver for my kernel,however,this XHCI
Driver(usb.pas) is errorous when I trying to receive the data from my
XHCI Driver.
Does anyone have the idea edit this XHCI driver(usb.pas)?If you have
any problem about these errorous driver source code,I will solve it
within 2 days.
The usb.pas is too large to place in this topic,So I provide github
link for you to look up.

----------------------------------------------------------------------
WayneSherman · 2025-04-24 22:58

Did you compare your code to the xHCI spec?  See 4.2 Host Controller
Initialization here:

https://www.intel.com/content/www/us/en/content-
details/625472/extensible-host-controller-interface-for-universal-
serial-bus-xhci-requirements-specification.html

Is the PCIe bus initialized properly?
Are you detecting the xHCI controller on the PCIe bus?

Did you compare your code with some working xHCI drivers?
XHCI driver in Linux:
https://github.com/torvalds/linux/blob/master/drivers/usb/host/xhci-
pci.c
https://github.com/torvalds/linux/blob/master/drivers/usb/host/xhci.c
https://github.com/torvalds/linux/tree/master/drivers/usb/host

XHCI driver in Tianocore UEFI firmware:
https://github.com/tianocore/edk2/tree/master/MdeModulePkg/Bus/Pci/Xhc
iDxe

USB XHCI driver tutorial:
https://www.reddit.com/r/osdev/comments/1k3vn9p/xhci_driver_tutorial_s
eries/
https://www.youtube.com/playlist?list=PLATP7rOKo3E82tBnMp90B4zejpWeAKl
xn
"Learn how to write a USB xHCI driver from scratch. This series walks
through the xHCI specification, explains data structures and register-
level interactions, and shows how to build a robust, interrupt-driven
USB 3.0 host controller driver step by step."

[EDIT] This repo is for the XHCI tutorial above:
https://github.com/FlareCoding/stellux-xhci-tutorial/tree/setup-0
This one has the full driver from stellux OS:
https://github.com/FlareCoding/StelluxOS/tree/master/kernel/src/driver
s/usb/xhci

Also, if you running under UEFI, it looks like that provides a higher
level interface for USB:
https://uefi.org/specs/UEFI/2.11/17_Protocols_USB_Support.html

----------------------------------------------------------------------
TYDQ · 2025-04-27 07:45

Quote from: WayneSherman on April 25, 2025, 12:58:19 amDid you compare
your code to the xHCI spec?  See 4.2 Host Controller Initialization
here:

https://www.intel.com/content/www/us/en/content-
details/625472/extensible-host-controller-interface-for-universal-
serial-bus-xhci-requirements-specification.html

Is the PCIe bus initialized properly?
Are you detecting the xHCI controller on the PCIe bus?

Did you compare your code with some working xHCI drivers?
XHCI driver in Linux:
https://github.com/torvalds/linux/blob/master/drivers/usb/host/xhci-
pci.c
https://github.com/torvalds/linux/blob/master/drivers/usb/host/xhci.c
https://github.com/torvalds/linux/tree/master/drivers/usb/host

XHCI driver in Tianocore UEFI firmware:
https://github.com/tianocore/edk2/tree/master/MdeModulePkg/Bus/Pci/Xhc
iDxe

USB XHCI driver tutorial:
https://www.reddit.com/r/osdev/comments/1k3vn9p/xhci_driver_tutorial_s
eries/
https://www.youtube.com/playlist?list=PLATP7rOKo3E82tBnMp90B4zejpWeAKl
xn
"Learn how to write a USB xHCI driver from scratch. This series walks
through the xHCI specification, explains data structures and register-
level interactions, and shows how to build a robust, interrupt-driven
USB 3.0 host controller driver step by step."

[EDIT] This repo is for the XHCI tutorial above:
https://github.com/FlareCoding/stellux-xhci-tutorial/tree/setup-0
This one has the full driver from stellux OS:
https://github.com/FlareCoding/StelluxOS/tree/master/kernel/src/driver
s/usb/xhci

Also, if you running under UEFI, it looks like that provides a higher
level interface for USB:
https://uefi.org/specs/UEFI/2.11/17_Protocols_USB_Support.html
Ok,Thank you for giving me the documentation,I have exitbootservices()
and UEFI BootServices does not function.