OK, I'm too dumb for installing - any help appreciated lazarus / 15-macOS - Mac OS X ---------------------------------------------------------------------- Wulfgier · 2014-03-26 16:27 Hey there Trying to install, I downloaded everything (I guess) necessary and keep on getting these kind of errors. What's wrong with me, uhm... my setup? Thx in advance... (Yes, it's german, sorry for that, but maybe you can figure it out anyway). ---------------------------------------------------------------------- jwdietrich · 2014-03-26 16:36 Please provide information regarding your Mac OS X version and the Lazarus version you intend to install. Did you read http://wiki.lazarus.freepascal.org/Installing_Lazarus_on_MacOS_X? ---------------------------------------------------------------------- Wulfgier · 2014-03-28 10:57 Yes, I read those things and tried my very best. Unfortunately I didn't find anything matching my prob. My OS X ist 10.9.2 and I intend to install Lazarus 1.2 (latest ed. afaik) i.e. lazarus-1.2.0-20140301-i386-macosx along with fpc-2.6.4.intel-macosx. But this msg keeps prompting. Thx for your help... ---------------------------------------------------------------------- kamischi · 2014-03-28 14:26 fpcsrc seems missing. ---------------------------------------------------------------------- Wulfgier · 2014-04-03 09:06 Great, thank you. Any idea how to fix that? ---------------------------------------------------------------------- Wulfgier · 2014-04-08 08:48 Oh I see, this question was too dumb now. You see, I have already tried to install all of what is necessary, including fpcsrc and so on. But this error msg keeps popping up. How can I install these progs in a way they will work? Do I have to do a clean uninstall first and then try to reinstall everything, and if in which sequence? fpc then fpcsrc then lazarus? Or more like lazarus - fpcsrc - fpc or... It starts to feel a little like the good old Windows world where everything is so complicated ---------------------------------------------------------------------- kamischi · 2014-04-15 09:03 gdb seems to be missing, too. Did you install Xcode and the command line utilities? The use of the Debugger (gdb) can be switched on in the preferences of Lazarus. MiSchi. ---------------------------------------------------------------------- Wulfgier · 2014-04-25 08:13 Hi MiSchi Uh... Xcode. I see. No, I did not install it. Excuse me for a second, I will do so and come back to you. ---------------------------------------------------------------------- Wulfgier · 2014-04-25 11:11 Ok, Xcode installed. Same error... ---------------------------------------------------------------------- herux · 2014-04-26 04:25 try to type 'fpc' in the terminal, and see what happen ? ---------------------------------------------------------------------- jwdietrich · 2014-04-26 08:12 In addition to that you should check the paths as displayed in the preferences window. Usually, the correct path to FPC is /usr/local/bin/ppc386 for Intel- based Macs or /usr/local/bin/ppcppc for PPC-based Macs, respectively. ---------------------------------------------------------------------- Wulfgier · 2014-04-27 17:05 These two infos seem to be helpful. I'll give it a try next time I'm in the office. But: afair the path you posted was ok on my machine. I followed it earlier and found the compete installation but the required INI-file. So I created an empty one to see what lazarus says. It came up with the same error: ini-file not found Say, isn't there any complete installation or setup file which does all the tricks necessary? Why is it like "Download this with version that, then download this with version that, now use this with version...". I know I'm too dumb for all of this. But I just want to get it running and then finally start programming on that machine. I'll let you know what came out on this... Thx ---------------------------------------------------------------------- Wulfgier · 2014-04-28 09:46 Quote from: herux on April 26, 2014, 06:25:36 amtry to type 'fpc' in the terminal, and see what happen ? ---------------------------------------------------------------------- Wulfgier · 2014-04-28 09:46 Quote from: jwdietrich on April 26, 2014, 10:12:51 amIn addition to that you should check the paths as displayed in the preferences window. Usually, the correct path to FPC is /usr/local/bin/ppc386 for Intel- based Macs or /usr/local/bin/ppcppc for PPC-based Macs, respectively. Is that helpful?? ---------------------------------------------------------------------- Wulfgier · 2014-04-28 09:50 Following that link it says: not found ---------------------------------------------------------------------- jwdietrich · 2014-05-12 00:18 That means that you have a dead alias. Usually, the original file is located at /usr/local/lib//, e. g. /usr/local/lib/2.6.4/ppcppc or /usr/local/lib/2.6.2/ppc386. You should try to re-install FPC or to manually replace the alias with a correct one. ---------------------------------------------------------------------- Wulfgier · 2014-05-12 14:31 That sounds reasonable. I'll give it a try tomorrow and then let you know. Thx a lot! ---------------------------------------------------------------------- jwdietrich · 2014-11-29 20:00 Quote from: Wulfgier on May 12, 2014, 04:31:38 pmThat sounds reasonable. I'll give it a try tomorrow and then let you know. Thx a lot! Were you successful? ---------------------------------------------------------------------- Wulfgier · 2015-04-17 20:51 Hey JWDietrich Sorry for letting you (all) wait for my answer. But unfortunately I failed on all tries. I was hacking so much on my OS X that I finally had to reinstall my Mac Anyway, I used this unintended opportunity to change my HD to a new SSD; wonderful side affect though So I gave up on Lazarus an converted my porgy to PHP, MySQL and HTML. It went ok, I sold it, it is productive ever since and I'll keep on with that. But, nevertheless, here I am again: the need for a native prog on Mac arose again. And since I'm too afraid of making the same errors again, I'll start out on a virtual machine (I love Oracle for that!). Pls community: would you all be so kind and help thru this again? What are the steps to take? I am ready to try again. Could anyone pls post the actual links for downloads here and (treating me the douche I am...) in the required order of installation? Thx (it won't take another year for my reply, promise) ---------------------------------------------------------------------- Jonas Maebe · 2015-04-19 16:11 Download and install fpc-2.6.4.intel-macosx.dmg from http://www.freepascal.org/down/i386/macosx-netherlands.var Download and install all files except for fpc-2.6.4.intel-macosx.dmg from http://sourceforge.net/projects/lazarus/files/Lazarus%20Mac%20OS% 20X%20i386/Lazarus%201.4RC3/ (the order doesn't matter) That's it. Edit: well, at least if your system has been set up for developing already. If not, first install the Xcode command line tools (http://wi ki.freepascal.org/Installing_Lazarus_on_MacOS_X#Xcode_5.0.2B_compatibi lity_.28Mac_OS_X_10.8_and_10.9.29 ). And if you want to debug from the Lazarus IDE, also install gdb: http://wiki.freepascal.org/GDB_on_OS_X_Mavericks_and_Xcode_5 ---------------------------------------------------------------------- Wulfgier · 2015-04-22 19:51 That's exactly what I was looking for. Thx a lot. If you say "If not, first install Xcode...", this would be in advance of anything else? I did not prepare this (virtual) machine for anything. ---------------------------------------------------------------------- jwdietrich · 2015-04-26 07:10 Quote from: Wulfgier on April 22, 2015, 09:51:42 pmIf you say "If not, first install Xcode...", this would be in advance of anything else? I did not prepare this (virtual) machine for anything. Yes, that it the advice. Normally, you shouldn't even be able to install Free Pascal without having installed Xcode and its command line tools. ---------------------------------------------------------------------- Wulfgier · 2015-04-28 17:35 Thx, I will keep you informed about success or ... ---------------------------------------------------------------------- Wulfgier · 2015-05-24 14:07 Holy crap!  I followed all the instructions an look at this: same error!!! I go crazy ---------------------------------------------------------------------- Wulfgier · 2015-05-24 14:52 Ok, I dived deeper into the error msg and followed a remarkable amount of wiki links talking about "home-brew", "fink", "code signing" and so I did a few of these things (as far as I was able to understand and believe) and voilà: I somehow managed to compile my "Hello World" (see pic.) - thank you everybody!! But (!): when I use CMD-R to compile and run I get a new error (funny, isn't it?)