Help Needed in Installing the Lazarus IDE on Raspberry PI 3 lazarus / 13-General ---------------------------------------------------------------------- Xor-el · 2018-11-09 09:05 Hi, So I just got my Raspberry PI 3 some days back and decided to get Lazarus and FPC installed on it. I first of all installed FPC from ftp://freepascal.stack.nl/pub/mirrors/fpc/dist/3.0.4/arm- linux/fpc-3.0.4.arm-linux-eabihf-raspberry.tar, it installed successfully. So I tried installing Lazarus 2.0RC2 from svn https://svn.freepascal.org/svn/lazarus/tags/lazarus_2_0_0_RC2/ , after downloading the sources, I followed the instructions, the build started successfully but started failing at some point with this error message below Quotepi@raspberrypi:/usr/local/lazarus/source $ sudo make bigide make -C packager/registration make[1]: Entering directory '/usr/local/lazarus/source/packager/registration' /bin/rm -f ../units/arm-linux/fcllaz.ppu /usr/local/bin/ppcarm -MObjFPC -Scghi -O1 -g -gl -l -vewnhibq -Fu. -Fu/usr/local/lib/fpc/3.0.4/units/arm-linux/rtl -FE. -FU../units/arm- linux -darm fcllaz.pas Hint: (11030) Start of reading config file /etc/fpc.cfg Hint: (11031) End of reading config file /etc/fpc.cfg Free Pascal Compiler version 3.0.4 [2017/10/11] for arm Copyright (c) 1993-2017 by Florian Klaempfl and others (1002) Target OS: Linux for ARMHF (3104) Compiling fcllaz.pas (9009) Assembling fcllaz (1008) 21 lines compiled, 0.8 sec (1022) 2 hint(s) issued /bin/cp -f Makefile.compiled ../units/arm-linux/FCL.compiled make[1]: Leaving directory '/usr/local/lazarus/source/packager/registration' make -C components/lazutils make[1]: Entering directory '/usr/local/lazarus/source/components/lazutils' /bin/rm -f lib/arm-linux/lazutils.ppu /usr/local/bin/ppcarm -MObjFPC -Scghi -O1 -g -gl -l -vewnhibq -Fu../../packager/units/arm-linux -Fu. -Fu/usr/local/lib/fpc/3.0.4/units/arm-linux/rtl -FE. -FUlib/arm-linux -darm lazutils.pas Hint: (11030) Start of reading config file /etc/fpc.cfg Hint: (11031) End of reading config file /etc/fpc.cfg Free Pascal Compiler version 3.0.4 [2017/10/11] for arm Copyright (c) 1993-2017 by Florian Klaempfl and others (1002) Target OS: Linux for ARMHF (3104) Compiling lazutils.pas (9009) Assembling lazutils (1008) 35 lines compiled, 1.0 sec (1022) 2 hint(s) issued /bin/cp -f Makefile.compiled lib/arm-linux/LazUtils.compiled make[1]: Leaving directory '/usr/local/lazarus/source/components/lazutils' make -C components/codetools make[1]: Entering directory '/usr/local/lazarus/source/components/codetools' /bin/rm -f units/arm-linux/codetools.ppu /usr/local/bin/ppcarm -MObjFPC -Sci -O1 -g -gl -l -vewnhibq -Fu../../packager/units/arm-linux -Fu../lazutils/lib/arm-linux -Fu. -Fu/usr/local/lib/fpc/3.0.4/units/arm-linux/rtl -FE. -FUunits/arm- linux -darm codetools.pas Hint: (11030) Start of reading config file /etc/fpc.cfg Hint: (11031) End of reading config file /etc/fpc.cfg Free Pascal Compiler version 3.0.4 [2017/10/11] for arm Copyright (c) 1993-2017 by Florian Klaempfl and others (1002) Target OS: Linux for ARMHF (3104) Compiling codetools.pas (9009) Assembling codetools (1008) 33 lines compiled, 1.0 sec (1022) 2 hint(s) issued /bin/cp -f Makefile.compiled units/arm-linux/CodeTools.compiled make[1]: Leaving directory '/usr/local/lazarus/source/components/codetools' make -C lcl LCL_PLATFORM=nogui make[1]: Entering directory '/usr/local/lazarus/source/lcl' /bin/rm -f units/arm-linux/alllclunits.ppu /usr/local/bin/ppcarm -gl -Sic -Fu../packager/units/arm-linux -Fu../components/lazutils/lib/arm-linux -Fu. -Funonwin32 -Fuforms -Fuwidgetset -Fu/usr/local/lib/fpc/3.0.4/units/arm-linux/rtl -Fiinclude -FE. -FUunits/arm-linux -darm alllclunits.pp Free Pascal Compiler version 3.0.4 [2017/10/11] for arm Copyright (c) 1993-2017 by Florian Klaempfl and others Target OS: Linux for ARMHF Compiling alllclunits.pp Assembling alllclunits 42 lines compiled, 3.7 sec /bin/cp -f Makefile.compiled units/arm-linux/LCLBase.compiled make -C interfaces all make[2]: Entering directory '/usr/local/lazarus/source/lcl/interfaces' make -C nogui all make[3]: Entering directory '/usr/local/lazarus/source/lcl/interfaces/nogui' /bin/rm -f ../../units/arm-linux/nogui/lcl.ppu \     ../../units/arm-linux/nogui/lcl.o /usr/local/bin/ppcarm -gl -dnogui -Fu../../units/arm-linux -Fu../../../packager/units/arm-linux -Fu../../../components/lazutils/lib/arm-linux -Fu.. -Fu. -Fu/usr/local/lib/fpc/3.0.4/units/arm-linux/rtl -FE. -FU../../units/arm-linux/nogui -darm ../lcl.pas Free Pascal Compiler version 3.0.4 [2017/10/11] for arm Copyright (c) 1993-2017 by Florian Klaempfl and others Target OS: Linux for ARMHF Compiling ../lcl.pas Assembling lcl 21 lines compiled, 2.0 sec /bin/cp -f Makefile.compiled ../../units/arm-linux/nogui/LCL.compiled make[3]: Leaving directory '/usr/local/lazarus/source/lcl/interfaces/nogui' make[2]: Leaving directory '/usr/local/lazarus/source/lcl/interfaces' make[1]: Leaving directory '/usr/local/lazarus/source/lcl' make -C tools make[1]: Entering directory '/usr/local/lazarus/source/tools' make[1]: *** No targets.  Stop.                                                                                                      <<================================= Error started from here. make[1]: Leaving directory '/usr/local/lazarus/source/tools' Makefile:3371: recipe for target 'lazbuild' failed make: *** [lazbuild] Error 2 pi@raspberrypi:/usr/local/lazarus/source $ Can anyone help me out please? Am already loosing my mind. Stuck on this for 2 days now. By the way, I have already increased the swap file size. Thanks. ---------------------------------------------------------------------- Thaddy · 2018-11-09 09:51 Two things: - compiling lazarus does not need sudo so don't use it. - did you check out lazarus from git? My recipe works like this: First get subversion if you do not have it installed already: sudo apt-get update && sudo apt-get dist-upgrade -y && sudo apt-get install subversion -y svn co https://svn.freepascal.org/svn/lazarus/tags/lazarus_1_8_4/ lazarus cd lazarus A first time may need a make all: make clean all useride The simplest solution, however, and this also resolves any dependencies, is to add stretch-backports to sources.list and install fpc 3.0.4 and lazarus 1.8.4 through the raspbian package manager. I showed how to do that before on this forum. If noon of this works, plz report back: I am writing most of my stuff here from a RPi3 of some sort so I can make it work. ---------------------------------------------------------------------- Xor-el · 2018-11-09 10:25 Quote from: Thaddy on November 09, 2018, 10:51:15 amTwo things: - compiling lazarus does not need sudo so don't use it. - did you check out lazarus from git? My recipe works like this: First get subversion if you do not have it installed already: sudo apt-get update && sudo apt-get dist-upgrade -y && sudo apt-get install subversion -y svn co https://svn.freepascal.org/svn/lazarus/tags/lazarus_1_8_4/ lazarus cd lazarus A first time may need a make all: make clean all useride The simplest solution, however, and this also resolves any dependencies, is to add stretch-backports to sources.list and install fpc 3.0.4 and lazarus 1.8.4 through the raspbian package manager. I showed how to do that before on this forum. If noon of this works, plz report back: I am writing most of my stuff here from a RPi3 of some sort so I can make it work. thanks thaddy. I tried make clean all useride and I got an error message (about cleanide). I will try the stretch backports and report back. Thanks once again. ---------------------------------------------------------------------- Xor-el · 2018-11-09 15:20 Hi Thaddy. Am glad to inform you that it did work perfectly using the backport method.  Thanks a lot. Bad news though  After I did restart the PI, it refused to boot up, I guess may be the OS did crash. will reformat the SD Card later when I have some time. Thanks once again. ---------------------------------------------------------------------- Thaddy · 2018-11-09 16:12 Make sure the power supply is at least 2.1A Best to use the official one. (that's 2.5A) That is the most common cause of crashed cards. Also: I actually run the OS from a - fast - USB stick on one or two Pi's, that seems more stable. ---------------------------------------------------------------------- Xor-el · 2018-11-09 16:27 Quote from: Thaddy on November 09, 2018, 05:12:31 pmMake sure the power supply is at least 2.1A Best to use the official one. (that's 2.5A) That is the most common cause of crashed cards. Also: I actually run the OS from a - fast - USB stick on one or two Pi's, that seems more stable. Duly noted. Thanks. side question? Do you use a hdmi display or you SSH into your pi and connect with any vnc viewer?