[SOLVED] libraries-not-found-errors when cross-compiling 32 bit GUI
application
lazarus / 1-Linux

----------------------------------------------------------------------
Hartmut · 2018-10-19 17:56

I have Lazarus 1.8.4 on Ubuntu 18.04 64 bit. Compiling a 64 bit GUI
program or a 32 bit console program works. But compiling a 32 bit GUI
program leeds to:
Code: [Select]project1.lpr(20,1) Warning: "crti.o" not found, this
will probably cause a linking failure
project1.lpr(20,1) Warning: "crtn.o" not found, this will probably
cause a linking failure
project1.lpr(20,1) Error: Error while linking
I get this errors even if I create a new empty project via Menu
Project / New Project / Application (see attached project).

I searched for this error in goggle and this forum and got a couple of
matches, but the only solution I understand was to add a -Fl option to
fpc.cfg. But which path must I add?

I searched my HD for this 2 files and found:
Code: [Select]date     time  size path and file
---------------------------------
16.04.18 22:14 1216 /usr/lib/x86_64-linux-gnu/crti.o
16.04.18 22:14  648 /usr/lib/x86_64-linux-gnu/crtn.o
16.04.18 22:14 1084 /usr/lib32/crti.o
16.04.18 22:14  440 /usr/lib32/crtn.o
16.04.18 22:14  836 /usr/libx32/crti.o
16.04.18 22:14  440 /usr/libx32/crtn.o

I suppose from the name that the 1st path is 64 bit. From comparing
/usr/lib32/ and /usr/libx32/ I suppose the last is 64 bit so I added
"/usr/lib32/" in Lazarus to my Compiler Options / Path / Libraries
(-Fl). Then I got:
Code: [Select]Compile Project, CPU: i386, Target:
/home/hg6/utis/project1: Exit code 256, Errors: 1
Linking /home/hg6/utis/project1
/usr/bin/ld: warning: /home/hg6/utis/link.res contains output
sections; did you forget -T?
/usr/bin/ld: inkompatibles //usr/lib/x86_64-linux-
gnu/libgdk-x11-2.0.so wird bei der Suche nach -lgdk-x11-2.0
übersprungen
/usr/bin/ld: inkompatibles //usr/lib/x86_64-linux-gnu/libgdk-x11-2.0.a
wird bei der Suche nach -lgdk-x11-2.0 übersprungen
/usr/bin/ld: -lgdk-x11-2.0 kann nicht gefunden werden
/usr/bin/ld: inkompatibles //usr/lib/x86_64-linux-gnu/libX11.so wird
bei der Suche nach -lX11 übersprungen
/usr/bin/ld: inkompatibles //usr/lib/x86_64-linux-gnu/libX11.a wird
bei der Suche nach -lX11 übersprungen
/usr/bin/ld: -lX11 kann nicht gefunden werden
/usr/bin/ld: inkompatibles //usr/lib/x86_64-linux-
gnu/libgdk_pixbuf-2.0.so wird bei der Suche nach -lgdk_pixbuf-2.0
übersprungen
/usr/bin/ld: -lgdk_pixbuf-2.0 kann nicht gefunden werden
/usr/bin/ld: inkompatibles //usr/lib/x86_64-linux-
gnu/libgtk-x11-2.0.so wird bei der Suche nach -lgtk-x11-2.0
übersprungen
/usr/bin/ld: inkompatibles //usr/lib/x86_64-linux-gnu/libgtk-x11-2.0.a
wird bei der Suche nach -lgtk-x11-2.0 übersprungen
/usr/bin/ld: -lgtk-x11-2.0 kann nicht gefunden werden
/usr/bin/ld: inkompatibles //usr/lib/x86_64-linux-
gnu/libgobject-2.0.so wird bei der Suche nach -lgobject-2.0
übersprungen
/usr/bin/ld: inkompatibles //usr/lib/x86_64-linux-gnu/libgobject-2.0.a
wird bei der Suche nach -lgobject-2.0 übersprungen
/usr/bin/ld: -lgobject-2.0 kann nicht gefunden werden
/usr/bin/ld: inkompatibles //usr/lib/x86_64-linux-gnu/libglib-2.0.so
wird bei der Suche nach -lglib-2.0 übersprungen
/usr/bin/ld: inkompatibles //usr/lib/x86_64-linux-gnu/libglib-2.0.a
wird bei der Suche nach -lglib-2.0 übersprungen
/usr/bin/ld: -lglib-2.0 kann nicht gefunden werden
/usr/bin/ld: inkompatibles //usr/lib/x86_64-linux-
gnu/libgthread-2.0.so wird bei der Suche nach -lgthread-2.0
übersprungen
/usr/bin/ld: inkompatibles //usr/lib/x86_64-linux-gnu/libgthread-2.0.a
wird bei der Suche nach -lgthread-2.0 übersprungen
/usr/bin/ld: -lgthread-2.0 kann nicht gefunden werden
/usr/bin/ld: inkompatibles //usr/lib/x86_64-linux-
gnu/libgmodule-2.0.so wird bei der Suche nach -lgmodule-2.0
übersprungen
/usr/bin/ld: inkompatibles //usr/lib/x86_64-linux-gnu/libgmodule-2.0.a
wird bei der Suche nach -lgmodule-2.0 übersprungen
/usr/bin/ld: -lgmodule-2.0 kann nicht gefunden werden
/usr/bin/ld: inkompatibles //usr/lib/x86_64-linux-gnu/libpango-1.0.so
wird bei der Suche nach -lpango-1.0 übersprungen
/usr/bin/ld: inkompatibles //usr/lib/x86_64-linux-gnu/libpango-1.0.a
wird bei der Suche nach -lpango-1.0 übersprungen
/usr/bin/ld: -lpango-1.0 kann nicht gefunden werden
/usr/bin/ld: inkompatibles //usr/lib/x86_64-linux-gnu/libcairo.so wird
bei der Suche nach -lcairo übersprungen
/usr/bin/ld: inkompatibles //usr/lib/x86_64-linux-gnu/libcairo.a wird
bei der Suche nach -lcairo übersprungen
/usr/bin/ld: -lcairo kann nicht gefunden werden
/usr/bin/ld: inkompatibles //usr/lib/x86_64-linux-gnu/libatk-1.0.so
wird bei der Suche nach -latk-1.0 übersprungen
/usr/bin/ld: -latk-1.0 kann nicht gefunden werden
project1.lpr(20,1) Error: Error while linking
Although I switched Lazarus to English, most messages are in German.
Translated they mean:
   incompatible xxx is skipped while searching for yyy
   yyy cannot be found
  
I found my fpc.cfg (see attached) in /etc/. All places with "-Fl" are:
Code: [Select]# path to the gcclib                       
#ifdef cpui386
-Fl/usr/lib/gcc/x86_64-linux-gnu/7/32       <- path exists
#endif
#ifdef cpux86_64
-Fl/usr/lib/gcc/x86_64-linux-gnu/7          <- path exists
#endif

# searchpath for libraries
#-Fl/usr/lib/fpc/$fpcversion/lib
#-Fl/lib;/usr/lib
-Fl/usr/lib/fpc/$fpcversion/lib/$FPCTARGET  <- path does NOT exist

I hoped to repair my fpc.cfg via Tool fpcmkcfg. In /etc/ I entered
Code: [Select]sudo fpcmkcfg -d basepath=/usr/lib/fpc/\$fpcversion -o
./fpc.cfgbut this changed only 1 line with -FM option (see attached
file) and I get the same error messages as before.

I'm a total beginner to Linux and to cross compiling. Any help is
welcome. Thanks a lot in advance.

Here is how I installed Lazarus (according to
https://forum.lazarus.freepascal.org/index.php/topic,41524.0.html):
Code: [Select]1) Uninstalled Lazarus, fpc-src, fpc
2) Installed fpc_3.0.4-3_amd64.deb using Gdebi
3) Installed fpc-src_3.0.4-2_amd64.deb using Gdebi
4) Restarted the computer
5) Disconnect the internet connection
6) Installed lazarus-project_1.8.4-0_amd64.deb using Gdebi
12) Did version locking on fpc and fpc-src using Muon Package Manager
(having KDE-Plasma desktop) Before this installation I tried different
other installations, but then enabling of cross-compiling was not
possible.

Here is how I enabled cross-compiling (according to
https://forum.lazarus.freepascal.org/index.php/topic,42364.0.html):
1. You need to install libc6-dev-i386 package
2. Use a text editor type: #!/bin/bash <newline> as --32 $@ and save
it as /usr/bin/i386-linux-as
3. Use a text editor type: #!/bin/bash <newline> ld -A elf32-i386 $@
and save it as /usr/bin/i386-linux-ld
4. sudo chmod +x /usr/bin/i386-linux-as
5. sudo chmod +x /usr/bin/i386-linux-ld
6. cd /usr/share/fpcsrc/3.0.4
7. sudo make clean all CPU_TARGET=i386
8. sudo make crossinstall OS_TARGET=linux CPU_TARGET=i386 
INSTALL_PREFIX=/usr
9. sudo ln -sf /usr/lib/fpc/3.0.4/ppcross386 /usr/bin/ppc386

----------------------------------------------------------------------
Cyrax · 2018-10-19 18:33

You need to use -Xd -Fl/usr/lib32 options. Add them end at fpc.cfg
file.

Quote#IFDEF LINUX
  #IFDEF CPU32
    -Fl/usr/lib32
    -Xd
  #ENDIF
#ENDIF

And you need to install 32-bit versions of GTK2 and other libraries.
Also you (may) need recompile them with these options : -mstackrealign
-mincoming-stack-boundary=2 due to ABI changes in 32-bit libraries.
32-bit FPC doesn't adhere to this ABI change. 64-bit FPC does not have
this problem, it produces compatible ABI.

See this bug report for more info :
https://bugs.freepascal.org/view.php?id=33425

----------------------------------------------------------------------
Hartmut · 2018-10-19 19:21

Thank you very much for you reply. I added the 5 lines to the end of
fpc.cfg file.

Quote from: Cyrax on October 19, 2018, 08:33:11 pmAnd you need to
install 32-bit versions of GTK2 and other libraries.
How do I install this? I searched Synaptic Package Manager for "gtk2"
and found ca. 90 matches which have something with gtk2 in it's name,
but nothing named "gtk2" and nothing which looked like 32 bit. Sorry
for my question, I'm an absolute beginner on Linux and nearly
everything is new to me...

Quote... due to ABI changes in 32-bit libraries. 32-bit FPC doesn't
adhere to this ABI change...
I never heared ABI before. Do you mean
https://en.wikipedia.org/wiki/Application_binary_interface ?

QuoteSee this bug report for more info :
https://bugs.freepascal.org/view.php?id=33425
I read this report but understood nearly nothing. What do you want me
to say?

Thanks again for your help. Or is cross-compiling a GUI application to
difficult for a Linux beginner?

----------------------------------------------------------------------
Cyrax · 2018-10-19 20:54

Quote from: Hartmut on October 19, 2018, 09:21:40 pmThank you very
much for you reply. I added the 5 lines to the end of fpc.cfg file.

Quote from: Cyrax on October 19, 2018, 08:33:11 pmAnd you need to
install 32-bit versions of GTK2 and other libraries.
How do I install this? I searched Synaptic Package Manager for "gtk2"
and found ca. 90 matches which have something with gtk2 in it's name,
but nothing named "gtk2" and nothing which looked like 32 bit. Sorry
for my question, I'm an absolute beginner on Linux and nearly
everything is new to me...

You need to consult Ubuntu wiki for how to enable 32-bit repositories
and install 32-bit libraries from them. And in this case, how to
rebuild your own packages.

QuoteQuote... due to ABI changes in 32-bit libraries. 32-bit FPC
doesn't adhere to this ABI change...
I never heared ABI before. Do you mean
https://en.wikipedia.org/wiki/Application_binary_interface ?

Yes.

QuoteQuoteSee this bug report for more info :
https://bugs.freepascal.org/view.php?id=33425
I read this report but understood nearly nothing. What do you want me
to say?

Thanks again for your help. Or is cross-compiling a GUI application to
difficult for a Linux beginner?

Well, take this as an learning experience! 

I would recommend using Linux Containers (LXC or Docker) to experiment
on this, so you don't screw up your main OS.

----------------------------------------------------------------------
Hartmut · 2018-10-19 21:17

Thanks for your answers. Will follow them tomorrow (sounds difficult
for me). Good night...

----------------------------------------------------------------------
Hartmut · 2018-10-20 13:42

I spent a lot of time with google'ing for "Ubuntu wiki gtk2 enable
32-bit repositories install 32-bit libraries", "Ubuntu wiki GTK2
32-bit 64-bit", "Ubuntu GTK2 32-bit download" and variants of these. I
got a lot of material which was really hard to understand for me as a
beginner. But I still don't know, what is my next step:
must I "only" find, download and install a 32 bit version of GTK2? If
yes, where can I find it?or must I download the sources of GTK2 and
compile a 32 bit version by my own and place the result into the right
destination folder?

----------------------------------------------------------------------
WayneSherman · 2018-10-21 00:37

Quote from: Hartmut on October 19, 2018, 07:56:37 pmI have Lazarus
1.8.4 on Ubuntu 18.04 64 bit. Compiling a 64 bit GUI program or a 32
bit console program works. But compiling a 32 bit GUI program leeds
to:
Code: [Select]project1.lpr(20,1) Warning: "crti.o" not found, this
will probably cause a linking failure
project1.lpr(20,1) Warning: "crtn.o" not found, this will probably
cause a linking failure
project1.lpr(20,1) Error: Error while linking

Using Lazarus 1.8.4/FPC 3.0.4 (stable/stable) I just did a test on
Xubuntu 18.04 64-bit.  Compiling both 32-bit and 64-bit GUI programs
was successful.  Although it compiled successfully, the 32-bit program
did not run on Ubuntu 18.04 64-bit using the default installed
packages.  But when I copied the 32-bit GUI program to another Linux
system it worked.

I started from a minimal Xubuntu 18.04 64-bit install, using
fpcupdeluxe with these steps:

Code: Text  [Select][+][-]window.onload = function(){var x1 =
document.getElementById("main_content_section"); if (x1) { var x =
document.getElementsByClassName("geshi");for (var i = 0; i sudo apt
install -y libx11-dev libgtk2.0-dev libgdk-pixbuf2.0-dev libcairo2-dev
libpango1.0-dev libxtst-dev libatk1.0-dev libghc-x11-dev freeglut3
freeglut3-devsudo apt install -y git subversion make build-essential
gdb zip unzip unrar wget # Download "fpcupdeluxe-x86_64-linux" from#
https://github.com/newpascal/fpcupdeluxe/releases/tag/1.6.2c# Give
execute permission to fpcupdeluxe-x86_64-linux and run it.# Select FPC
stable and Lazarus stable and click "Install/update FPC+Laz".# After
that completes select CPU "i386" and OS "linux" and "Install cross-
compiler"  (** Select "yes" when missing tools message box appears
**) # Run Lazarus from the desktop link created by fpcupdeluxe.#
Create a new GUI project, do a test build for the default 64-bit
target and run to make sure it works.# In Project Options, under
Config and Target, change the Target CPU family to "i386".# Do another
Run | Build and it should successfully build a 32-bit executable.#
(you have to run this from a 32-bit Linux OS, or from a 64-bit OS with
the proper libraries installed)

----------------------------------------------------------------------
Hartmut · 2018-10-21 14:18

Thanks a lot for your detailed answer.

I also need to run the 32 bit program on my 64 bit Ubuntu. If I only
can cross-compile 32 bit, but cannot run it, this makes no sense in my
case. Sorry, that I did not mention that in my 1st question.

Quote from: WayneSherman on October 21, 2018, 02:37:13 am# Do another
Run | Build and it should successfully build a 32-bit executable.
# (you have to run this from a 32-bit Linux OS, or from a 64-bit OS
with the proper libraries installed)

Please, which are "the proper libraries installed" which I need to run
a 32 bit GUI program?
Thanks again for your help.

----------------------------------------------------------------------
WayneSherman · 2018-10-21 21:07

Quote from: Hartmut on October 21, 2018, 04:18:00 pmI also need to run
the 32 bit program on my 64 bit Ubuntu.
...
Please, which are "the proper libraries installed" which I need to run
a 32 bit GUI program?

Ubuntu is built to use Debian Multiarch which allows installation of
packages for multiple CPU architectures on the same OS.  Ubuntu 18.04
64-bit should already be configured for Multiarch and i386, but to
confirm:

#confirm i386 is added as a Multiarch architecture
dpkg --print-foreign-architectures
# it should print "i386".
# If i386 architecture is missing, it can be added like this:
sudo dpkg --add-architecture i386
sudo apt update

apt can be used to install packages for alternate architectures by
putting a suffix on the package.
For example:  sudo apt install package-name:i386

Now you need to 1) find the dependencies, 2) find the packages which
contain them, and 3) install the i386 version of those packages:

1) Find the dependencies of your executable
#Use ldd and/or readelf to list dependencies for an executable. 
Before ldd will work with 32-bit executables, you have to install
32-bit libc:
sudo apt install libc6:i386

readelf -d /path/to/executable | grep NEEDED
or
ldd /path/to/executable
gives this list:
linux-gate.so.1 (0xf7f48000)
libdl.so.2 => /lib/i386-linux-gnu/libdl.so.2 (0xf7f2f000)
libpthread.so.0 => /lib/i386-linux-gnu/libpthread.so.0 (0xf7f10000)
libgdk-x11-2.0.so.0 => not found
libX11.so.6 => not found
libgdk_pixbuf-2.0.so.0 => not found
libgtk-x11-2.0.so.0 => not found
libgobject-2.0.so.0 => not found
libglib-2.0.so.0 => not found
libgthread-2.0.so.0 => not found
libgmodule-2.0.so.0 => not found
libpango-1.0.so.0 => not found
libcairo.so.2 => not found
libatk-1.0.so.0 => not found
libc.so.6 => /lib/i386-linux-gnu/libc.so.6 (0xf7d32000)
/lib/ld-linux.so.2 (0xf7f4a000)

2) Find the packages which contain the dependent files

Use dpkg -S filename to search for the packages that contain the
missing files.  That gives us this list:
libgtk2.0-0
libx11-6
libgdk-pixbuf2.0-0
libglib2.0-0
libpango-1.0-0
libcairo2
libatk1.0-0

3) Install the i386 version of the missing packages
sudo apt install libgtk2.0-0:i386 libx11-6:i386 libgdk-
pixbuf2.0-0:i386 libglib2.0-0:i386 libpango-1.0-0:i386 libcairo2:i386
libatk1.0-0:i386

Now you should be able to run your 32-bit Lazarus GUI program on
64-bit Ubuntu.

----------------------------------------------------------------------
Hartmut · 2018-10-22 20:20

Hello WayneSherman, thank you so much for your detailed and valuable
help.

I could run fpcupdeluxe for both steps without any problems and
without any errors. You gave me exactly the informations which I
needed as a beginner to be successful. You are a great teacher.

Compiling 64-bit works. Cross-compiling 32-bit gives me this error:

Code: [Select]Compile Project, CPU: i386, Target: project2: Exit code
256, Errors: 1
/opt/lazarus_184/cross/lib/i386-linux//libresolv.so.2: undefined
reference to `__res_maybe_init@GLIBC_PRIVATE'
/usr/lib/i386-linux-gnu//libgio-2.0.so.0: undefined reference to
`g_build_filename_valist'
project2.lpr(20,1) Error: Error while linking
But I must stop for tonight, will conntinue tomorrow trying to
understand/solve this error, if I can. Will report then my result.
Thank you very much again.

----------------------------------------------------------------------
WayneSherman · 2018-10-22 21:42

Quote from: Hartmut on October 22, 2018, 10:20:34 pmCode:
[Select]Compile Project, CPU: i386, Target: project2: Exit code 256,
Errors: 1
/opt/lazarus_184/cross/lib/i386-linux//libresolv.so.2: undefined
reference to `__res_maybe_init@GLIBC_PRIVATE'
/usr/lib/i386-linux-gnu//libgio-2.0.so.0: undefined reference to
`g_build_filename_valist'
project2.lpr(20,1) Error: Error while linking
fpcupdeluxe installs lazarus and fpc into a directory isolated from
other Lazarus/FPC installations.
The default install directory is in your users home folder:
/home/[user]/fpcupdeluxe
Did you change the default installation location when you ran
fpcupdeluxe?

When you run Lazarus (the one fpcupdeluxe installed), the environment
has to be setup to run from the correct folders and use the correct
config files.
Are you running Lazarus using the desktop link which fpcupdeluxe
creates?
Or, alternately running Lazarus using the launch script created in
your home folder (~/Lazarus_fpcupdeluxe)?

----------------------------------------------------------------------
WayneSherman · 2018-10-22 22:52

I just tested it again and I am now getting "undefined reference"
errors also.  Apparently after installing the i386 libraries, some
library files are causing the linking to fail.

Uninstalling the i386 libraries allows a Lazarus 32-bit minimal
application to build again:
sudo apt purge libgtk2.0-0:i386 libx11-6:i386 libgdk-pixbuf2.0-0:i386
libglib2.0-0:i386 libpango-1.0-0:i386 libcairo2:i386 libatk1.0-0:i386
sudo apt autoremove
hmm...

----------------------------------------------------------------------
Hartmut · 2018-10-23 13:42

Quote from: WayneSherman on October 22, 2018, 11:42:12 pmDid you
change the default installation location when you ran fpcupdeluxe?
Yes, I changed it to /opt/lazarus_184/ and took ownership by "sudo
chown -R hg6:hg6 /opt/lazarus_184". Hope this was the correct way.

QuoteWhen you run Lazarus (the one fpcupdeluxe installed), the
environment has to be setup to run from the correct folders and use
the correct config files.
Are you running Lazarus using the desktop link which fpcupdeluxe
creates?
Or, alternately running Lazarus using the launch script created in
your home folder (~/Lazarus_fpcupdeluxe)?
Yes, as you requested in your helpful introductions how to use
fpcupdeluxe.

Quote from: WayneSherman on October 23, 2018, 12:52:39 amUninstalling
the i386 libraries allows a Lazarus 32-bit minimal application to
build again:
sudo apt purge libgtk2.0-0:i386 libx11-6:i386 libgdk-pixbuf2.0-0:i386
libglib2.0-0:i386 libpango-1.0-0:i386 libcairo2:i386 libatk1.0-0:i386
sudo apt autoremove
I did above uninstalls and got then:
Code: [Select]Compile Project, CPU: i386, Target: project2: Exit code
256, Errors: 1
Free Pascal Compiler version 3.0.4-r1:37121 [2018/10/22] for i386
Copyright (c) 1993-2017 by Florian Klaempfl and others
Target OS: Linux for i386
Compiling project2.lpr
Compiling unit2.pas
unit2.pas(18,28) Parameter "Sender" not used
unit2.pas(19,28) Parameter "Sender" not used
Compiling resource
/home/hg6/lazarus_experimente/lib/i386-linux/project2.or
/opt/lazarus_184/cross/bin/i386-linux/i386-linux-ld: warning: link.res
contains output sections; did you forget -T?
Linking project2
/opt/lazarus_184/cross/lib/i386-linux//libresolv.so.2: undefined
reference to `__res_maybe_init@GLIBC_PRIVATE'
project2.lpr(20,1) Error: Error while linking
project2.lpr(20,1) Verbose: There were 1 errors compiling module,
stopping

I found a "workaround" for this error:
Code: [Select]/opt/lazarus_184/cross/lib/i386-linux//libresolv.so.2:
undefined reference to `__res_maybe_init@GLIBC_PRIVATE' After a lot of
google'ing and some experiments I renamed file
/opt/lazarus_184/cross/lib/i386-linux/libresolv.so.2 so that it can't
be found. After that this error does not occur any longer.

Now I searched my harddisk for all files beginning with libresolv.so
and got:
Code: [Select]date     time     size  path + filename
---------------------------------------
16.04.18 22:14:20    17 /lib/i386-linux-gnu/libresolv.so.2
18.08.18 17:25:59    17 /lib/x86_64-linux-gnu/libresolv.so.2
16.04.18 22:14:20    17 /lib32/libresolv.so.2
16.04.18 22:14:20    17 /libx32/libresolv.so.2
15.04.16 01:00:32 87876
/opt/lazarus_184/cross/lib/i386-linux/libresolv.so.2
15.01.18 05:19:52    17 /snap/core/5328/lib/i386-linux-
gnu/libresolv.so.2
15.01.18 04:51:26    17 /snap/core/5328/lib/x86_64-linux-
gnu/libresolv.so.2
15.01.18 05:19:52    17 /snap/core/5548/lib/i386-linux-
gnu/libresolv.so.2
15.01.18 04:51:26    17 /snap/core/5548/lib/x86_64-linux-
gnu/libresolv.so.2
15.01.18 05:19:52    17 /snap/core/5662/lib/i386-linux-
gnu/libresolv.so.2
15.01.18 04:51:26    17 /snap/core/5662/lib/x86_64-linux-
gnu/libresolv.so.2
15.01.18 05:19:52    17 /snap/wine-platform-i386/20/lib/i386-linux-
gnu/libresolv.so.2
15.01.18 05:19:52    17 /snap/wine-platform-i386/22/lib/i386-linux-
gnu/libresolv.so.2
15.01.18 05:19:52    17 /snap/wine-platform-i386/23/lib/i386-linux-
gnu/libresolv.so.2
16.04.18 22:14:20    34 /usr/lib/i386-linux-gnu/libresolv.so
16.04.18 22:14:20    36 /usr/lib/x86_64-linux-gnu/libresolv.so
16.04.18 22:14:20    21 /usr/lib32/libresolv.so
16.04.18 22:14:20    22 /usr/libx32/libresolv.so You see, the file in
/opt/lazarus_184/ is very old. Can this be the root cause, that
fpcupdeluxe installs a library which is to old?

Unfortunately I did not find a solution/workaround for the 2nd error:
Code: [Select]/usr/lib/i386-linux-gnu//libgio-2.0.so.0: undefined
reference to `g_build_filename_valist'

Renaming of "/usr/lib/i386-linux-gnu//libgio-2.0.so.0" did not help. I
searched my harddisk for all files beginning with libgio-2.0.so and
got:
Code: [Select]date     time        size  path + filename
---------------------------------------
10.04.16 22:52:52 1,865020
/opt/lazarus_184/cross/lib/i386-linux/libgio-2.0.so.0
31.07.18 07:41:43       22 /snap/core/5328/usr/lib/x86_64-linux-
gnu/libgio-2.0.so.0
31.07.18 07:42:26 1,599368 /snap/core/5328/usr/lib/x86_64-linux-
gnu/libgio-2.0.so.0.4800.2
18.09.18 14:07:14       22 /snap/core/5548/usr/lib/x86_64-linux-
gnu/libgio-2.0.so.0
18.09.18 14:07:45 1,599368 /snap/core/5548/usr/lib/x86_64-linux-
gnu/libgio-2.0.so.0.4800.2
18.09.18 14:07:14       22 /snap/core/5662/usr/lib/x86_64-linux-
gnu/libgio-2.0.so.0
18.09.18 14:07:45 1,599368 /snap/core/5662/usr/lib/x86_64-linux-
gnu/libgio-2.0.so.0.4800.2
29.03.18 15:34:30       22
/snap/gnome-3-26-1604/59/usr/lib/x86_64-linux-gnu/libgio-2.0.so.0
31.10.17 15:39:55 1,674264
/snap/gnome-3-26-1604/59/usr/lib/x86_64-linux-
gnu/libgio-2.0.so.0.5400.1
09.07.18 15:48:30       22
/snap/gnome-3-26-1604/70/usr/lib/x86_64-linux-gnu/libgio-2.0.so.0
09.07.18 15:48:36 1,686776
/snap/gnome-3-26-1604/70/usr/lib/x86_64-linux-
gnu/libgio-2.0.so.0.5600.1
09.07.18 15:48:30       22
/snap/gnome-3-26-1604/74/usr/lib/x86_64-linux-gnu/libgio-2.0.so.0
09.07.18 15:48:36 1,686776
/snap/gnome-3-26-1604/74/usr/lib/x86_64-linux-
gnu/libgio-2.0.so.0.5600.1
18.09.18 14:13:14       22 /snap/wine-
platform-i386/20/usr/lib/i386-linux-gnu/libgio-2.0.so.0
18.09.18 14:14:17 1,865020 /snap/wine-
platform-i386/20/usr/lib/i386-linux-gnu/libgio-2.0.so.0.4800.2
18.09.18 14:13:14       22 /snap/wine-
platform-i386/22/usr/lib/i386-linux-gnu/libgio-2.0.so.0
18.09.18 14:14:17 1,865020 /snap/wine-
platform-i386/22/usr/lib/i386-linux-gnu/libgio-2.0.so.0.4800.2
18.09.18 14:13:14       22 /snap/wine-
platform-i386/23/usr/lib/i386-linux-gnu/libgio-2.0.so.0
18.09.18 14:14:17 1,865020 /snap/wine-
platform-i386/23/usr/lib/i386-linux-gnu/libgio-2.0.so.0.4800.2
17.09.18 14:52:54       22 /usr/lib/i386-linux-gnu/libgio-2.0.so.0
17.09.18 14:52:54 1,984508 /usr/lib/i386-linux-
gnu/libgio-2.0.so.0.5600.2
17.09.18 14:52:54       22 /usr/lib/x86_64-linux-gnu/libgio-2.0.so
17.09.18 14:52:54       22 /usr/lib/x86_64-linux-gnu/libgio-2.0.so.0
17.09.18 14:52:54 1,690808 /usr/lib/x86_64-linux-
gnu/libgio-2.0.so.0.5600.2
 You see, that the file in /opt/lazarus_184/ is very old too, but it
seems not beeing used and renaming it did not help. Maybe we have here
also a version conflict?

What can I do?

----------------------------------------------------------------------
Thaddy · 2018-10-23 13:47

No. The core of your problem is that you try a cross-compile from
libraries that are actually installed.
I'd recommend using a separate fpc.cfg and a completely separate
directory structure independent from the installed OS that contains
the libraries you need for cross-compilation.
In this case the age of the file does not really matter (although
fpcdeluxe uses more very old files, they are tested)

----------------------------------------------------------------------
DonAlfredo · 2018-10-23 14:21

You can try this.

You can point fpcupdeluxe towards your own system 32bit library.
In your case: /lib32
You can also point fpcupdeluxe towards your own system 32bit binary
utilities.

If you want to do this.
In setup+ , you can choose your os and cpu in "Custom tools location
..."
And enter your location where to find the bins and the libs.
After setting these locations, you can build the cross-compiler again.

I hope this will work. I do not test this setup very often.

And yes, the libs provided by fpcupdeluxe are old.
Out of all distro's available out there (in 2016), I had to make a
single choice ... ;-)

----------------------------------------------------------------------
WayneSherman · 2018-10-23 14:43

Quote from: DonAlfredo on October 23, 2018, 04:21:40 pmYou can try
this.
You can point fpcupdeluxe towards your own system 32bit library.
In your case: /lib32

Note that newer Ubuntu versions (since 12.04?) using Multiarch use
different paths for 64-bit and 32-bit libraries.
See here: https://wiki.ubuntu.com/MultiarchSpec

On Ubuntu 18.04 I have:

64-bit Libraries:
/lib/x86_64-linux-gnu
/usr/lib/x86_64-linux-gnu

32-bit Libraries:
/lib/i386-linux-gnu
/usr/lib/i386-linux-gnu

----------------------------------------------------------------------
WayneSherman · 2018-10-23 14:52

Quote from: DonAlfredo on October 23, 2018, 04:21:40 pmYou can try
this
...
After setting these locations, you can build the cross-compiler again.

Is it necessary to rebuild the cross-compiler, or can fpc.cfg be
modified to point to the systems 32-bit libraries?

I have these library paths in my fpcupdeluxe fpc.cfg file:

Code: [Select]# path to the gcclib
#ifdef cpui386
-Fl/usr/lib/gcc/x86_64-linux-gnu/7
#endif

# searchpath for libraries
-Fl/home/user/fpcupdeluxe2/fpc/lib/$FPCTARGET

# library search path
-Fl/usr/lib/$FPCTARGET;/usr/lib/$FPCTARGET-
gnu;/lib/$FPCTARGET;/lib/$FPCTARGET-gnu;/usr/lib/gcc/x86_64-linux-
gnu/7.3.0

----------------------------------------------------------------------
DonAlfredo · 2018-10-23 15:01

Your fpc.cfg does not look like anything that has been generated by
fpcupdeluxe !
You have now touched the limits of what fpcupdeluxe can do for you.

In order to work under all these different conditions, fpcupdeluxe
generates and maintains its own fpc.cfg for its own FPC. Naturally,
changing these settings by hand is allowed, but can or will disturb
fpcupdeluxe.

Again, fpcupdeluxe can help you. But not under all conditions.
Please stick to the instructions I wrote earlier.
Point towards the libs, wherever they are.
Point towards the bins, wherever they are.
Run again.

----------------------------------------------------------------------
WayneSherman · 2018-10-23 15:22

Quote from: DonAlfredo on October 23, 2018, 05:01:01 pmYour fpc.cfg
does not look like anything that has been generated by fpcupdeluxe !

I think those lines were taken directly from an unedited fpc.cfg. 
Please stand-by, testing again...

----------------------------------------------------------------------
WayneSherman · 2018-10-23 16:57

Quote from: DonAlfredo on October 23, 2018, 05:01:01 pmYour fpc.cfg
does not look like anything that has been generated by fpcupdeluxe !

Just confirmed, those fpc.cfg lines were created by fpcupdeluxe.

I tested again:
Code: [Select]#tested on Xubuntu 18.04 64-bit (starting from a minimal
OS install)

#install fpcupdeluxe dependencies
sudo apt install -y libx11-dev libgtk2.0-dev libgdk-pixbuf2.0-dev
libcairo2-dev libpango1.0-dev libxtst-dev libatk1.0-dev libghc-x11-dev
freeglut3 freeglut3-dev
sudo apt install -y git subversion make build-essential gdb zip unzip
unrar wget

#install dependencies for a 32-bit executable built with Lazarus
sudo apt install libgtk2.0-0:i386 libx11-6:i386 libgdk-
pixbuf2.0-0:i386 libglib2.0-0:i386 libpango-1.0-0:i386 libcairo2:i386
libatk1.0-0:i386

#use latest fpcupdeluxe to build Laz/fpc stable/stable and
crosscompiler i386/linux
https://github.com/newpascal/fpcupdeluxe/releases/tag/1.6.2e

#Open Lazarus and perform a "Clean up and Build" of a minimal
application (empty form) with i386 target CPU
#Errors:
  Compile Project, CPU: i386, Target: project1: Exit code 256, Errors:
1
  /lib/i386-linux-gnu//libmount.so.1: undefined reference to
`getrandom@GLIBC_2.25'
  /usr/lib/i386-linux-gnu//libgio-2.0.so.0: undefined reference to
`g_build_filename_valist'
  /lib/i386-linux-gnu//libbsd.so.0: undefined reference to
`__explicit_bzero_chk@GLIBC_2.25'
  project1.lpr(20,1) Error: Error while linking

Then I uninstall the 32-bit libraries:
Code: [Select]sudo apt purge libgtk2.0-0:i386 libx11-6:i386 libgdk-
pixbuf2.0-0:i386 libglib2.0-0:i386 libpango-1.0-0:i386 libcairo2:i386
libatk1.0-0:i386
sudo apt autoremove
Now doing a "Clean up and build" succeeds.

Unmodified fpc.cfg from fpcupdeluxe is attached.

----------------------------------------------------------------------
Hartmut · 2018-10-23 17:43

Thanks a lot to all for your answers and that you want to help me.

But I have difficulties to understand what you mean, because I'm an
absolute beginner on Linux and on cross-compiling.

Quote from: Thaddy on October 23, 2018, 03:47:25 pmI'd recommend using
a separate fpc.cfg and a completely separate directory structure
independent from the installed OS that contains the libraries you need
for cross-compilation.
I thought I did this by using fpcupdeluxe to create a separate Lazarus
installation with its own fpc.cfg and its own library folder
<install_folder>/cross/lib/i386-linux/
What else must I do?

Quote from: DonAlfredo on October 23, 2018, 04:21:40 pmIn setup+ , you
can choose your os and cpu in "Custom tools location ..."
And enter your location where to find the bins and the libs.
In setup+ , I first set "Search options" to custom and then enter the
lib-Path in "Libraries" and the bin-Path in "Tools"?
But which lib-Path must I use? You recommended /lib32, but
WayneSherman wrote that they are in /lib/i386-linux-gnu and
/usr/lib/i386-linux-gnu. What must I use?
And which bin-Path must I use? I don't know it. Please, how can I find
this out?

Sorry, that for me things are very difficult because everything is new
and unknown for me.
Thanks again for your help.

----------------------------------------------------------------------
DonAlfredo · 2018-10-23 17:51

@Hartmut

There is a separate forum thread about fpcupdeluxe
http://forum.lazarus.freepascal.org/index.php/topic,34645.0.html

It is best if you post fpcupdeluxe related questions there !

To answer your question.
Fpcupdeluxe is a tool to help you install FPC and Lazarus if (but not
limited to):
1) other methods fail.
2) you need something special like easy cross-compiling.
In your case: just use the standard settings and let fpcupdeluxe do
its thing.
In most cases, this will work.

If not, post your question with details.

----------------------------------------------------------------------
benohb · 2018-10-23 22:47

I think ..you  can not  install package libgtk2.0-dev:i386 and
libgtk2.0-dev In the same device
It is the hell of a conflict between packages

----------------------------------------------------------------------
WayneSherman · 2018-10-23 23:15

Quote from: benohb on October 24, 2018, 12:47:24 amI think ..you  can
not  install package libgtk2.0-dev:i386 and libgtk2.0-dev In the same
device
It is the hell of a conflict between packages
As far as I know, libgtk2.0-dev:i386 is not being installed, the non
dev version is: libgtk2.0-0:i386

The idea of multiarch is that different directories are used for
different CPU architectures:

libgtk2.0-dev (64-bit) library files (.so and .a) get installed into
/usr/lib/x86_64-linux-gnu/
https://packages.ubuntu.com/bionic/amd64/libgtk2.0-dev/filelist

libgtk2.0-0:i386 library files (.so) get installed into
/usr/lib/i386-linux-gnu/
https://packages.ubuntu.com/bionic/i386/libgtk2.0-0/filelist

----------------------------------------------------------------------
Hartmut · 2018-11-02 17:52

Quote from: DonAlfredo on October 23, 2018, 07:51:54 pmThere is a
separate forum thread about fpcupdeluxe
http://forum.lazarus.freepascal.org/index.php/topic,34645.0.html
It is best if you post fpcupdeluxe related questions there !

This topic was continued (as requested by DonAlfredo) in https://forum
.lazarus.freepascal.org/index.php/topic,34645.msg300126.html#msg300126
and was solved in https://forum.lazarus.freepascal.org/index.php/topic
,34645.msg301060.html#msg301060

Now I can cross-compile and run 32-bit programs on a 64-bit Ubuntu
18.04 with Lazarus 1.8.4.

Thanks a lot again to all who helped me.