lazarus on SuSE 9.3 and Athlon64
lazarus / 1-Linux

----------------------------------------------------------------------
balta · 2005-10-16 11:04

Hi

I tried to run lazarus 0.9.10 on my Athlon64 but it doesn't work
I have installed the rpm-package fpc-2.0.0-0.x86_64.rpm without any
problems and I have compiled lazarus 0.9.10 without problems.
But then I run lazarus the first message is:

"Das Free-Pascal-Quelltextverzeichnis wurde nicht gefunden.
Einige Quelltextfunktionen werden nicht funktionieren.
Es wird empfohlen, dass Sie den FPC-Quelltext installieren und den
Pfad auf sie setzen, und zwar unter
Einstellungen->Umgebungseinstellungen->Dateien"

Then I click "Übergehen" and if I want to go in this dialoge the
following message is coming:

"Error reading EnvironmentOptionsDialog.HorzScrollBar.Page: Acces
violation

Press Ok to ignore.
Press Cancel to stop the program."

At other dialoges a similar message comes and if I want to start my
program a similar message comes, too.

I would be very happy if you can help me.

----------------------------------------------------------------------
Anonymous · 2005-10-16 11:25

Maybe the problem is just what it says:
Have you installed the sources: fpcsrc-2.0.0....rpm?

----------------------------------------------------------------------
balta · 2005-10-16 13:40

No I haven't installed them yet.
But can you say me where I can find this??
On freepascal.org I can only find fpc-2.0.0-0.src.rpm
Is this the same??

----------------------------------------------------------------------
matthijs · 2005-10-16 14:15

No it is not the same.  Have a look at this page. You will find this
QuoteDownload fpcsrc-2.0.0-0.i386.rpm

----------------------------------------------------------------------
balta · 2005-10-16 14:30

But can I use it?
I have a x86_64-system and this package seems to be for i386

----------------------------------------------------------------------
Anonymous · 2005-10-16 16:59

I'd say yes.

----------------------------------------------------------------------
Vincent Snijders · 2005-10-16 17:20

fpc 2.0.0 can't be used for lazarus om athlon 64. You will get this
error:
Code: [Select]Error reading
EnvironmentOptionsDialog.HorzScrollBar.Page: Acces violation.

I suggest you take the fpc 2.0.1 source rpms for lazarus 0.9.10 from
the lazarus sourceforge site.

----------------------------------------------------------------------
balta · 2005-10-16 17:53

I've installed it without problems, and the first error is away, but
the problems with the access violation is already there.

----------------------------------------------------------------------
Vincent Snijders · 2005-10-16 18:07

Quote from: "balta"I've installed it without problems...
Did you install fpc 2.0.1?

----------------------------------------------------------------------
balta · 2005-10-16 18:20

Should I download fpc-2.0.1-050923.src.rpm and
fpcsrc-2.0.1-050923.src.rpm ???
And then just install this packages and build lazarus or have I to
build fpc before, too ??? (because this are only source-rpms)
If I have to build fpc can you say me how, please??

----------------------------------------------------------------------
Vincent Snijders · 2005-10-16 18:26

since you have amd64 you can't use the i586 packages for fpc and
lazarus (the fpcsrc package is an exception).

I presume you know how to build source rpms for you architecture.
First install the fpc rpm and then the build the lazarus rpm from the
source rpm and install that.

If that doesn't work for you, I recommand you skip the rpms and
install from the source instead using the tar.gz's. See Installing
Lazarus wiki for more details.

----------------------------------------------------------------------
balta · 2005-10-17 14:53

hi

first thanks to all for the good and fast help yesterday!

But I have one question:
Which compiler should I use to compile fpc-2.0.1???

If I use my fpc-2.0.0-0 (I have this version as rpm) there are error-
messages while compiling fpc-2.0.1

PS: fpcsrc I was able to build

----------------------------------------------------------------------
Vincent Snijders · 2005-10-17 15:12

There should be none.

Fpc 2.0.0 is suitable for making fpc 2.0.1.

What error message do you get?

----------------------------------------------------------------------
balta · 2005-10-17 15:23

I have typed "make all" in the source-directory:

[...]
/usr/bin/ppcx64 -Ur -Ur -Xs  -n -Fi../inc -Fi../x86_64 -Fi../unix
-Fix86_64 -FE. -FU/home/arthas/Downloads/fpc-2.0.1-
050923.source/fpc/rtl/units/x86_64-linux -dx86_64 -dRELEASE
../unix/cthreads.pp
cthreads.pp(600,30) Error: Incompatible types: got "<address of
function(Pointer, QWord, TThreadFunc, Pointer, LongWord,var
LongInt):LongInt;Register>" expected "<procedure variable type of
function(Pointer, LongWord, TThreadFunc, Pointer, LongWord,var Lo
cthreads.pp(646) Fatal: There were 1 errors compiling module, stopping
cthreads.pp(646) Error: Compilation aborted
make[7]: *** [cthreads.ppu] Fehler 1
make[7]: Leaving directory
`/home/arthas/Downloads/fpc-2.0.1-050923.source/fpc/rtl/linux'
make[6]: *** [linux_all] Fehler 2
make[6]: Leaving directory
`/home/arthas/Downloads/fpc-2.0.1-050923.source/fpc/rtl'
make[5]: ***  Fehler 2
make[5]: Leaving directory
`/home/arthas/Downloads/fpc-2.0.1-050923.source/fpc/compiler'
make[4]: *** [next] Fehler 2
make[4]: Leaving directory
`/home/arthas/Downloads/fpc-2.0.1-050923.source/fpc/compiler'
make[3]: *** [ppc1] Fehler 2
make[3]: Leaving directory
`/home/arthas/Downloads/fpc-2.0.1-050923.source/fpc/compiler'
make[2]: *** [cycle] Fehler 2
make[2]: Leaving directory
`/home/arthas/Downloads/fpc-2.0.1-050923.source/fpc/compiler'
make[1]: *** [compiler_cycle] Fehler 2
make[1]: Leaving directory
`/home/arthas/Downloads/fpc-2.0.1-050923.source/fpc'
make: *** [build-stamp.x86_64-linux] Fehler 2

----------------------------------------------------------------------
Anonymous · 2005-10-17 18:39

The fpc 2.0.1 you downloaded cannot be compiled for 64 bits. :-(

It has an error, which has been fixed in the mean time. The current
svn version of fpc 2.0.1 doesn't have this error.

Depending on your perserverance, I can give you three options:
- Use svn to get the latest fpc 2.0.1: svn co
http://svn.freepascal.org/svn/fpc/branches/fixes_2_0
- Wait for the fpc 2.0.2 release and use that (estiimated within 2
weeks)
- Wait for lazarus 0.9.12, that will depend on fpc 2.0.2 (estimated in
4-6 weeks)

Disclaimer: Time esitimates are my personal estimates, subject to
change and without any guarentee.

----------------------------------------------------------------------
Vincent Snijders · 2005-10-17 19:51

I didn't noticed I was logged out. As you might have guessed, the
previous post is mine.

----------------------------------------------------------------------
balta · 2005-10-18 17:03

I've tried your first option, and typed again "make all". Now I get
another error after a longer time:

[...]
make[5]: Leaving directory
`/home/arthas/Downloads/svn/fixes_2_0/ide/compiler'
make[4]: Leaving directory `/home/arthas/Downloads/svn/fixes_2_0/ide'
make testgdb
make[4]: Entering directory `/home/arthas/Downloads/svn/fixes_2_0/ide'
LibGDB not found
LIBGDBFILE=
GDBLIBDIR=/home/arthas/Downloads/svn/fixes_2_0/libgdb/linux

make[4]: Leaving directory `/home/arthas/Downloads/svn/fixes_2_0/ide'
make fpc_all
make[4]: Entering directory `/home/arthas/Downloads/svn/fixes_2_0/ide'
/home/arthas/Downloads/svn/fixes_2_0/compiler/ppcx64 -Ur -Xs  -n -Sg
-Fu/home/arthas/Downloads/svn/fixes_2_0/rtl/units/x86_64-linux
-Fu/home/arthas/Downloads/svn/fixes_2_0/fv/units/x86_64-linux -Fu/home
/arthas/Downloads/svn/fixes_2_0/packages/base/gdbint/units/x86_64-
linux -Fu/home/arthas/Downloads/svn/fixes_2_0/packages/base/regexpr/un
its/x86_64-linux -FE. -FUunits/x86_64-linux -Fl/usr/lib64/gcc-
lib/x86_64-suse-linux/3.3.5 -Fl/usr/X11R6/lib64/Xaw95
-Fl/usr/X11R6/lib64/Xaw3d -Fl/usr/X11R6/lib64 -Fl/usr/X11R6/lib/Xaw95
-Fl/usr/X11R6/lib/Xaw3d -Fl/usr/X11R6/lib -Fl/usr/x86_64-suse-
linux/lib64 -Fl/usr/x86_64-suse-linux/lib -Fl/usr/local/lib
-Fl/usr/openwin/lib -Fl/opt/kde/lib -Fl/opt/kde2/lib -Fl/opt/kde3/lib
-Fl/opt/gnome/lib -Fl/opt/gnome2/lib -Fl/lib64 -Fl/lib -Fl/usr/lib64
-Fl/usr/lib -Fl/usr/local/lib64 -Fl/usr/openwin/lib64
-Fl/opt/kde/lib64 -Fl/opt/kde2/lib64 -Fl/opt/kde3/lib64
-Fl/opt/gnome/lib64 -Fl/opt/gnome2/lib64 -Flinclude
-Fl/etc/ld.so.conf.d/*.conf -dx86_64 -dRELEASE -dNODEBUG fp.pas
/usr/bin/ld: cannot find -lncurses
fp.pas(263,5) Error: Error while linking
make[4]: *** [fp] Fehler 1
make[4]: Leaving directory `/home/arthas/Downloads/svn/fixes_2_0/ide'
make[3]: *** [buildfp] Fehler 2
make[3]: Leaving directory `/home/arthas/Downloads/svn/fixes_2_0/ide'
make[2]: *** [gdb] Fehler 2
make[2]: Leaving directory `/home/arthas/Downloads/svn/fixes_2_0/ide'
make[1]: *** [ide_all] Fehler 2
make[1]: Leaving directory `/home/arthas/Downloads/svn/fixes_2_0'
make: *** [build-stamp.x86_64-linux] Fehler 2

----------------------------------------------------------------------
Vincent Snijders · 2005-10-19 11:35

It seem you are missing the development libraries for ncurses.

----------------------------------------------------------------------
Anonymous · 2005-10-19 16:26

You will not believe it, but fpc is cmpiled with "make all" and
installed with "make install"  

Now then compiling lazarus I get this error:

make[2]: Entering directory
`/home/arthas/Downloads/lazarus-0.9.10-0/lazarus/ide'
/usr/local/bin/ppcx64 -gl -Fu../lcl/units/x86_64-linux
-Fu../lcl/units/x86_64-linux/gtk
-Fu../components/codetools/units/x86_64-linux
-Fu../components/synedit/units/x86_64-linux -Fu../components/custom
-Fu../components/mpaslex -Fu../ideintf/units/x86_64-linux
-Fu../designer -Fu../designer/units -Fu../debugger -Fu../packager
-Fu../packager/units/x86_64-linux -Fu.
-Fu/usr/local/lib/fpc/2.0.1/units/x86_64-linux/rtl
-Fu/usr/local/lib/fpc/2.0.1/units/x86_64-linux/paszlib
-Fu/usr/local/lib/fpc/2.0.1/units/x86_64-linux/netdb
-Fu/usr/local/lib/fpc/2.0.1/units/x86_64-linux/libasync
-Fu/usr/local/lib/fpc/2.0.1/units/x86_64-linux/pthreads
-Fu/usr/local/lib/fpc/2.0.1/units/x86_64-linux/fcl
-Fu/usr/local/lib/fpc/2.0.1/units/x86_64-linux/regexpr
-Fu/usr/local/lib/fpc/2.0.1/units/x86_64-linux/pasjpeg
-Fu/usr/local/lib/fpc/2.0.1/units/x86_64-linux/ibase
-Fu/usr/local/lib/fpc/2.0.1/units/x86_64-linux/postgres
-Fu/usr/local/lib/fpc/2.0.1/units/x86_64-linux/mysql
-Fu/usr/local/lib/fpc/2.0.1/units/x86_64-linux/sqlite -Fiinclude
-Fiinclude/linux -Fi../images -FE.. -FU../units/x86_64-linux
-Fl/usr/lib64/gcc-lib/x86_64-suse-linux/3.3.5
-Fl/usr/X11R6/lib64/Xaw95 -Fl/usr/X11R6/lib64/Xaw3d
-Fl/usr/X11R6/lib64 -Fl/usr/X11R6/lib/Xaw95 -Fl/usr/X11R6/lib/Xaw3d
-Fl/usr/X11R6/lib -Fl/usr/x86_64-suse-linux/lib64 -Fl/usr/x86_64-suse-
linux/lib -Fl/usr/local/lib -Fl/usr/openwin/lib -Fl/opt/kde/lib
-Fl/opt/kde2/lib -Fl/opt/kde3/lib -Fl/opt/gnome/lib -Fl/opt/gnome2/lib
-Fl/lib64 -Fl/lib -Fl/usr/lib64 -Fl/usr/lib -Fl/usr/local/lib64
-Fl/usr/openwin/lib64 -Fl/opt/kde/lib64 -Fl/opt/kde2/lib64
-Fl/opt/kde3/lib64 -Fl/opt/gnome/lib64 -Fl/opt/gnome2/lib64 -Flinclude
-Fl/etc/ld.so.conf.d/*.conf -dx86_64 lazarus.pp
Free Pascal Compiler version 2.0.1 [2005/10/18] for x86_64
Copyright (c) 1993-2005 by Florian Klaempfl
Target OS: Linux for x86-64
Compiling lazarus.pp
Fatal: Can't find unit glib
Fatal: Compilation aborted
make[2]: *** [lazarus] Fehler 1
make[2]: Leaving directory
`/home/arthas/Downloads/lazarus-0.9.10-0/lazarus/ide'
make[1]: *** [ide] Fehler 2
make[1]: Leaving directory
`/home/arthas/Downloads/lazarus-0.9.10-0/lazarus/ide'
make: *** [ide] Fehler 2

Is the Unit glib not installed with "make install"??

----------------------------------------------------------------------
Vincent Snijders · 2005-10-19 19:44

check, if you can find glib.ppu (of today) in
/usr/local/lib/fpc/2.0.1/units/x86_64-linux/gtk.

If it is there, then check /etc/fpc.cfg.

If you find lines like
-Fu/usr/local/lib/fpc/2.0.0/units/$fpctarget/*
or
-Fu/usr/local/lib/fpc/2.0.0/units/x86_64-linux/*
replace it bu
-Fu/usr/local/lib/fpc/$fpcversion/units/$fpctarget/*

----------------------------------------------------------------------
Anonymous · 2005-10-21 21:31

Now Lazarus is compiled on my system!!!
Now I have one last problem:

By compiling a program in lazarus, this message there is:

/usr/bin/ld: cannot find -lglib
project1.lpr(16) Error: Error while linking

glib(-devel) and glib2(-devel) are installed.

PS: Now I have a message then starting lazarus:

"Das Free-Pascal-Quelltextverzeichnis wurde nicht gefunden.
 Einige Quelltextfunktionen werden nicht funktionieren.
 Es wird empfohlen, dass Sie den FPC-Quelltext installieren und den
Pfad auf sie setzen, und zwar unter
Einstellungen->Umgebungseinstellungen->Dateien"

Is that important??

----------------------------------------------------------------------
Anonymous · 2005-10-21 22:11

The faq says:The normal installation creates /etc/fpc.cfg

I installed Lazarus 9.10 on 2 different systems, on both systems no
 fpc.cfg was created at all

I guess this causes the unit glib not found error

Theo

----------------------------------------------------------------------
balta · 2005-10-21 22:35

/etc/fpc.cfg exists.
It's not the UNIT glib, that's not found by FPC, glib isn't fount by
the linker ld.

----------------------------------------------------------------------
balta · 2005-10-21 22:48

Thanks for all!!
My lazarus now works perfectly!!

In the /etc/fpc.cfg only was this line:

-Fl/opt/gnome/lib

but it have to be on a 64bit-system:

-Fl/opt/gnome/lib64

Now it works!!!

----------------------------------------------------------------------
Vincent Snijders · 2005-10-22 08:24

Quote from: "Anonymous"
PS: Now I have a message then starting lazarus:

"Das Free-Pascal-Quelltextverzeichnis wurde nicht gefunden.
 Einige Quelltextfunktionen werden nicht funktionieren.
 Es wird empfohlen, dass Sie den FPC-Quelltext installieren und den
Pfad auf sie setzen, und zwar unter
Einstellungen->Umgebungseinstellungen->Dateien"

Is that important??
Yes, this is important for
- code completion
- event methode generation
- find declaration

Install the fpcsrc-xxx.rpm. (In the snapshots it is called fpc-src-
xxx.rpm)
It puts fpc sources in /usr/share/fpcsrc.