Path: news.uiowa.edu!chi-news.cic.net!ddsw1!news.mcs.net!in-news.erinet.com!bug.rahul.net!rahul.net!a2i!samba.rahul.net!rahul.net!a2i!olivea!spool.mu.edu!usenet.eel.ufl.edu!news.mathworks.com!newsfeed.internetmci.com!newshub.csu.net!cello.gina.calstate.edu!cello.gina.calstate.edu!not-for-mail From: sjensen@cello.gina.calstate.edu (Steve Jensen) Newsgroups: comp.sys.apple2 Subject: Re: //c power connector pinouts? Date: 14 Aug 1996 19:05:36 -0700 Organization: GINA and CORE+ Services of The California State University Lines: 40 Message-ID: <4uu0lg$op7@cello.gina.calstate.edu> References: <4ut1n9$pkn@lastactionhero.rs.itd.umich.edu> NNTP-Posting-Host: cello.gina.calstate.edu dogcow@monet.ccs.itd.umich.edu (Tom Spindler) writes: > If someone would either post or point me to what the //c power connector > pinouts are, I would very appreciative. > > (And if they want to give a description of a //c -> disk ][ interface, > all the better.) From the Apple //c Technical Reference Manual Section 11.2.2 The External Power Connector The external power supply is attached to the internal converter by means of a 7-pin DIN connector. The connector pins are identified in Figure 11-1 and Table 11-3. Figure 11-1 External Power Connector .. --+ +-- Pin# Signal .. / 7 |_| 1 \ Pin 1 Not Connected .. | 6 2 | Pin 2,3 Signal Ground .. \ 5 4 3 / Pin 4 Shield Ground .. \_______/ Pin 5,6 +15 VDC .. Pin 7 Not Connected Table 11-3 External Power Connector Signals Pin# Name Description 1,7 -- Not Connected 2,3 Ground Common Electrical Ground 4 Chassis Chassis Ground 5,6 +15 +15-volt DC input to converter eof _________________________________ | | | sjensen@qnis.net | | sjensen@cello.gina.calstate.edu | |_________________________________| Path: news1.icaen!news.uiowa.edu!news1.chicago.iagnet.net!iagnet.net!news.idt.net!cam-news-hub1.bbnplanet.com!news.bbnplanet.com!visi.com!not-for-mail From: nathan@visi.com (Nathan Mates) Newsgroups: comp.sys.apple2 Subject: Re: Apple //c power supply connector Date: 29 Nov 1997 19:08:39 GMT Organization: Vector Internet Services, Inc. Lines: 42 Message-ID: <65pp7n$1pq$1@darla.visi.com> References: <65pkmg$k69@netaxs.com> NNTP-Posting-Host: thumper.visi.com NNTP-Posting-Date: 29 Nov 1997 13:08:39 CST In article <65pkmg$k69@netaxs.com>, Alfred A. Skrocki wrote: >I recently got a hold of an Apple //c with color monitor >BUT no cables or connectors of any kind. Could anyone >tell me the pin out connections for the //c's power >connector. Thanks in advance. Drop by the comp.sys.apple2 Frequently Asked Questions (FAQ) at http://www.visi.com/~nathan/a2/faq/csa2.html In addition to future questions, it also has lists of pinouts. From that page, From the Apple //c Technical Reference Manual Section 11.2.2 The External Power Connector The external power supply is attached to the internal converter by means of a 7-pin DIN connector. The connector pins are identified in Figure 11-1 and Table 11-3. Figure 11-1 External Power Connector .. --+ +-- Pin# Signal .. / 7 |_| 1 \ Pin 1 Not Connected .. | 6 2 | Pin 2,3 Signal Ground .. \ 5 4 3 / Pin 4 Shield Ground .. \_______/ Pin 5,6 +15 VDC .. Pin 7 Not Connected Table 11-3 External Power Connector Signals Pin# Name Description 1,7 -- Not Connected 2,3 Ground Common Electrical Ground 4 Chassis Chassis Ground 5,6 +15 +15-volt DC input to converter Nathan Mates -- <*> Nathan Mates http://www.visi.com/~nathan/ <*> # This posting is copyright Nathan Mates, and may not be reprinted # in full, partial, or quoted form on any archive site associated with # Charles Turley.