(C) Daily Kos
This story was originally published by Daily Kos and is unaltered.
 . . . . . . . . . .



Saturday Morning Home Repair [1]

['Greg Dworkin', 'Mark Sumner', 'Crimson Quillfeather']

Date: 2026-09-12  

My friend Cam the Cop who in 2015 was hired @ Pro Fab to be my helper asked me if I could fix his aerator! I said yes without even looking at it!!

one arm that the wheel bolts too was bent

bent arm

easy Peasy. I fought the clamps a little then!

eeff

I used 2″ x 3″ x .250 steel rec tubing to fix the other bent piece!

tubing used to repair aerator

I clamped the old bent piece on the new tubing & transferred the hole pattern

There was two pieces bolted on that bent piece so I used both sets of holes!

Then painted it!

painted part

I am going to get up and go to drakestone & bolt that part on so the job is finished! And get a picture to finish writing this post!!

Cam said he will have to see if it works!! I answered you gave me a measurement! I made it work perfect!!

LOL

measurement

it is 8:32am, I will get dressed and go bolt this together & get the measurement to see it I hit my mark!

I didn’t check it! It should be within an inch of being level when hooked to the mower!!

LOL

9:50 am

eeff

[END]
---
[1] Url: https://www.dailykos.com/stories/2026/9/12/800097311/community/saturday-morning-home-repair/

Published and (C) by Daily Kos
Content appears here under this condition or license: Site content may be used for any purpose without permission unless otherwise specified.

via Magical.Fish Gopher News Feeds:
gopher://magical.fish/1/feeds/news/dailykos/