Newsgroups: comp.sys.ibm.pc.misc
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!usenet.ins.cwru.edu!po.CWRU.Edu!axa12
From: axa12@po.CWRU.Edu (Ashok Aiyar)
Subject: Re: Memory Too FAST?!?!?!
Message-ID: <1991Jun26.131422.8957@usenet.ins.cwru.edu>
Sender: news@usenet.ins.cwru.edu
Nntp-Posting-Host: cwns6.ins.cwru.edu
Organization: Case Western Reserve University, Cleveland, Ohio, (USA)
Date: Wed, 26 Jun 91 13:14:22 GMT
Lines:       14


Since you mentioned thta after you installed the new SIMMs, you
geet absolutely not response from the computer (normally at least
the initial diagnostics flash up), I wonder if there is any (ever
so remote) possibility that you burned the SIMMs accidentally
by static?  I have installed 80ns SIMMs in a DELL (I don't remember
the model, but it was a 25Mhz 386), and there was no problem.

Just a thought,
-- 
Ashok Aiyar
axa12@po.cwru.edu
aiyar@cwbio.bioc.cwru.edu
