Newsgroups: comp.sys.ibm.pc
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!usenet.ins.cwru.edu!po.CWRU.Edu!axa12
From: axa12@po.CWRU.Edu (Ashok Aiyar)
Subject: Help with DOS 5.0 memory relocation
Message-ID: <1991Jun30.155554.12164@usenet.ins.cwru.edu>
Sender: news@usenet.ins.cwru.edu
Nntp-Posting-Host: cwns6.ins.cwru.edu
Organization: Case Western Reserve University, Cleveland, Ohio, (USA)
Date: Sun, 30 Jun 91 15:55:54 GMT
Lines:       45


Hello:

I run a 386sx with 4 megs of RAM.
My operating systems are DOS 5.0 and Windows 3.0
I am trying to free as much conventional memory as I can by moving
drivers etc. in to upper memory.
The "mem /c |more" command revealed the following.
Conventional memory:
msdos
setver.exe
himem.sys
emm386.exe
command.com
Total conventional memory free 629216 (614.5 K)
Upper memory:
system
ansi.sys
smartdrv.sys
mouse.sys
fastopen.exe
Total upper memory free 59408 (58.0 K)

I have heard of people getting upto 630 K of conventional memory
free after loading DOS 5.0
My specific questions are:
1) Can I move setver.exe into upper memory.  If the answer is yes,
then can I move it's position in my config.sys file such that it is
after the lines:
	device=c:\dos\himem.sys AND
	device=c:\dos\emm386.exe noems
2)Can I move command.com into upper memory?  How should I do this?

If you have specifically done one of the above, I would appreciate
your comments.  I do not want any replies asking me to buy a
memory manager.

Thank you,

Ashok
-- 
Ashok Aiyar
axa12@po.cwru.edu
aiyar@cwbio.bioc.cwru.edu
