Newsgroups: comp.sys.mac.comm
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usenet
From: gad@eclipse.its.rpi.edu (Garance A. Drosehn)
Subject: Re: System 7 & AppleTalk Phase II
Message-ID: <8k=l9vq@rpi.edu>
Nntp-Posting-Host: eclipse.its.rpi.edu
References: <1991Jun21.053027.3049@aio.jsc.nasa.gov>
Date: 21 Jun 91 17:20:11 GMT
Lines: 25

 brian@galileo.uucp (Brian Donnell [PT4]) writes:
> That sounds very suspicious to me.  I have an EtherPort IIN from Shiva.
> And their drivers only give you EtherTalk Phase II for System 7.  I also
> seem to recall reading somewhere in Apple's manuals for System 7 that Phase
> I was being Phased out - and System 7 would only support Phase II.  I'll
> see if I can find it again and give you some page #'s.
> 
> In the meantime - I'd keep my fingers crossed if I were you.

While Apple is in the process of phasing out Phase I, it isn't dead yet.  You  
can even get the Phase I module from Applelink "for system 7" if you want (I  
think it's in the system 7 info folder).  The file you'll download is exactly  
the same as what we were using under system 6.

It's quite possible that the driver might not work with 32-bit addressing or  
with virtual memory, but if you don't have those on then you should be able to  
use it with system 7 and without your fingers crossed.

That might change whenever system 7.1 shows up, of course, so it would be  
prudent to switch over to Phase II sometime soon.

 -  -  -  -  -  -  -  -
Garance Alistair Drosehn   = gad@rpi.edu  or  gad@eclipse.its.rpi.edu
ITS Systems Programmer                       (handles NeXT-type mail)
Rensselaer Polytechnic Institute;  Troy NY  USA
