Newsgroups: comp.sys.ibm.pc.hardware
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!sdd.hp.com!wuarchive!mit-eddie!uw-beaver!milton!serval!yoda.eecs.wsu.edu!kirk
From: kirk@yoda.eecs.wsu.edu (James Kirk)
Subject: Re: Gateway 2000 486/33
Message-ID: <1991Jun25.001427.17701@serval.net.wsu.edu>
Sender: news@serval.net.wsu.edu (USENET News System)
Organization: Washington State University
References: <44717@netnews.upenn.edu> <44736@netnews.upenn.edu>
Date: Tue, 25 Jun 91 00:14:27 GMT

>In article <44717@netnews.upenn.edu> ferris@gradient.cis.upenn.edu (Richard T. Ferris) writes:
>>I recently bought the Gateway 486/33 (Micronics motherboard) and I
>>seem to be having difficulty accessing the floppy disk drives when I
>>am working in Windows 3.0 .  It happens when trying to install print
>>
>
>someone on Gateway's Compuserve Forum which said, strange as this may
>sound, that I had to be sure the turbo switch was disabled via the
>CMOS setup in order to avoid this problem.  I changed the setting and
>now everything is fine.  Except that the machine only works in high
>

You know I had this kind of problem on a brand X (unkown and not here AMI
bios) 386 except that firing up windows in the slow speed caused it to lock 
up. Couldn't even warm boot. It would just dit and beep at you. If you 
switched back to high speed it would work. Disabling the hardware switch
fixed this also.


jim..


-------------------------------------------------------------------------------
Those who say it can't be done will eat the dust of those doing it.
-------------------------------------------------------------------------------
Jim "Capt." Kirk			INTERNET : kirk@eecs.wsu.edu
Elect. Eng. & Comp. Sci.		UUCP     : ...uunet!eecs.wsu.edu!kirk
Wash. State University			BITNET   : kirkj@wsuvm1
Pullman WA 99164-2752		        DIALNET  : (509)-335-6887
-------------------------------------------------------------------------------
   Oh...I have no response to that! 
			--Meg Ryan in Joe vs. the Volcano
