Newsgroups: comp.sys.amiga.misc
Path: utzoo!censor!comspec!darrell
From: darrell@comspec.uucp (Darrell Grainger)
Subject: Re: HELP! Prefs-Problems under Wb 2.0
Organization: Comspec Communications Inc  Toronto Ontario
Date: Fri, 21 Jun 91 21:48:24 GMT
Message-ID: <1991Jun21.214824.4995@comspec.uucp>
Keywords: HELP
References: <1991Jun19.132820.19300@informatik.uni-erlangen.de>
Sender: Darrell Grainger

In article <1991Jun19.132820.19300@informatik.uni-erlangen.de> hgschmie@immd4.informatik.uni-erlangen.de (Henning Schmiedehausen) writes:
>Hi, everyone!
>
>Most important first: I use an A3000 with Kick 37.175, WB 37.48
>
>I want my system to boot up with an standard NTSC Hires Interlace 
>Display, but even if I set this with the prefs/Screenmode and the
                                          ^^^^^^^^^^^^^^^^
>prefs/Overscan program, the machine boots up with an 640x256 PAL
 ^^^^^^^^^^^^^^
 Just packed our demo 3000 for sale (getting an A3000UX-D!) so I cannot
test this to be sure but... there is a program prefs/Workbenchscreen (or
something like that). Try setting your screen resolution in there.

>display, and only after starting the iprefs program, the machine
>switches to the wanted resolution (AFTER closing the CLI, of 
>course). So my question is: How can I tell my Amy to boot with
>NTSC 640x400 resolution?

>	Ciao
>		Henning

-- 
Darrell Grainger % Comspec Communications Inc., Toronto, Ontario, Canada
darrell@comspec  % Disclaimer: All opinions expressed are my own. 
(416) 617-1475   % (416) 633-5605	(416)785-3553

