Newsgroups: comp.unix.sysv386
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!snorkelwacker.mit.edu!ira.uka.de!fauern!forwiss.uni-passau.de!forwiss.uni-passau.de!wiese
From: wiese@forwiss.uni-passau.de (Joachim Wiese)
Subject: Re: MFM/RLL Disk Driver for ISC or ESIX?
Message-ID: <1991Jun13.111228.6145@forwiss.uni-passau.de>
Sender: usenet@forwiss.uni-passau.de (USENET News System)
Nntp-Posting-Host: gandalf.forwiss.uni-passau.de
Organization: University of Passau, Germany
References: <1991Jun11.121605.11455@crash.cts.com> <16938@darkstar.ucsc.edu> <JTSILLAS.91Jun12083731@sprite.ma30.bull.com>
Date: Thu, 13 Jun 91 11:12:28 GMT
Lines: 30

In article <JTSILLAS.91Jun12083731@sprite.ma30.bull.com>, jtsillas@sprite.ma30.bull.com (James Tsillas) writes:

|> I believe the Adaptec RLL controller is configurable for IRQ15.

Thats right. I have an Adaptec ACB-2370 RLL controller that can be 
jumperd for IRQ15. But still I can't get it running as a second controller.
I dont have the specifications for the Jumpers.( just of ACB-2372 )

I tried:

J13  2-3  - IRQ15 
J14  2-3  - bios address CC00 
J13  1    - secondary io port  ( I am not shure with this one )

The first controller is an Ultrastore ESDI Controller.

Both controllers work fine if I set up RLL first( IRQ14,io port 1,c800)
 and ESDI second ( IRQ15 , io port 2 ,CC00 ); but this is not wat i nead, 
UNIX is on  the ESDI HD and neads io-port 1 etc.

If someone has the ACB-2370 description please send me the jumper settings.

Or can I get ISC running on the second controller ESDI HD ? 

Thanks in advance.

-- 
--------  O   Joachim Wiese - \O/  ---------------------------   O  ---------
-------- /!\  Uni. Passau----  !   wiese@forwiss.uni-passau.de  /!\ ---------
-------- / \  GERMANY ------- / \  ---------------------------  / \ ---------
