Newsgroups: comp.sys.atari.st
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!uunet!infonode!ingr!b11!jmack
From: jmack@b11.ingr.com (Cery McCormick)
Subject: Re: Reading 8-bit disks with an ST
Message-ID: <1991Jun7.150610.903@b11.ingr.com>
Summary: Use Xformer
Organization: Intergraph Corp. Huntsville, AL
References: <6DB632w164w@cellar.UUCP>
Date: Fri, 7 Jun 91 15:06:10 GMT
Lines: 13

In article <6DB632w164w@cellar.UUCP>, revpk@cellar.UUCP (Brian 'Rev P-K' Siano) writes:
>         Can anyone either outline or recommend a way for me to work up a 
> quick transfer system? Is it possible to hitch an old 810 disk drive to an 
> ST, and read ASCII files from it>
> 
>         Advice-- and especially a solution-- would be greatly appreciated.
> 
	You can use Derek Mihocka's (sp?) X-Former software. It requires
a special cable to go between the ST's printer port and the 8-bit drive, but
you can then read the 8-bit files into your ST.



