Newsgroups: comp.sys.atari.st.tech
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!uunet!comp.vuw.ac.nz!actrix!Roger.Sheppard
From: Roger.Sheppard@actrix.gen.nz (Roger Sheppard)
Subject: Re: lharc
Message-ID: <1991Jun03.153441.13140@actrix.gen.nz>
Organization: Actrix Networks
References: <6652@vela.acs.oakland.edu> <17637@chaph.usc.edu>
Date: Mon, 03 Jun 1991 15:34:41 GMT

In article <17637@chaph.usc.edu> baffoni@aludra.usc.edu (Juxtaposer) writes:
> In article <6652@vela.acs.oakland.edu> swood@vela.acs.oakland.edu ( EVENSONG) writes:
> >I just pulled a couple of versions of lharc off of the archive at umich,
> >but I have been having a hard time getting it to work on all files.  I 
> >keep either running into CRC errors, or I just get "no file" when I try
> >to extract an archive that I have downloaded.  I have run into this
> 
> 	I tried using a shell (arcshell2.5) but gave up because anytime you
> specified more than just "extract" or "list", it would get lharc confused and
> it would think you were looking for "xs.lzh" instead of using it as the command
> which allows "extract" and "hold screen".  I gave up using the shell and now
> use lharc from the ttp command line.  If you are using a shell, try removing
> the "extras" that you can do with it and just have it "extract".  It might 
> clear up the problem.  Or if you want to use the command line, just look in
> the docs that should come with the lharc - it should have the commands in an
> English (and German) doc.  If you want, "x <filename>" should unarc just fine
> from the command line (clicking on the ttp file).
> 
> >
> >What is the best version of lharc, and where can I find it?  And what may
> >be causing these things to have such a hard time?
> 
> I think the latest lharc out is lzh11319.lzh (that's funny - it's lharced!)
> and it's up on atari.archive.  BTW, what was/is the difference between lzh11316
> and lzh11319?  I can't read German or I might have gotten it from the docs...
> 
> >
> >swood
> >
> >-- 
> > ---- Insert favorite .signature here ----	| swood@argo.acs.oakland.edu
> >						| swood@vela.acs.oakland.edu
> >Bitnet:		swood@Oakland			| swood@unix.secs.oakland.edu
> >  UUCP:		...!uunet!umich!{vela, argo, unix, nucleus}!swood
> 
> -Mike

Note; you can Program Arcshell 2.5 to send any strings you like,
when selecting the Extract etc, hold down thw Alt key, this will give
you a option box you can put in the string that you wan't, the next
time you use it, just hold the Alt Key down to give you that Option,
problem is the Programble options are not saved..
also Arcshell 2.5 has a option for lzh11316 , but does not do a thing,
as it still send a 'z' for the directory option..






-- 
***  Roger W. Sheppard        *    Roger.Sheppard@bbs.actrix.gen.nz  ***
***  85 Donovan Rd          *  *   At least I don't Flicker, not     ***
***  Kapiti New Zealand..    *     like a dying light globe. !       ***
