Newsgroups: comp.sys.ibm.pc.hardware
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!ewahl
From: ewahl@magnus.acs.ohio-state.edu (Ed A Wahl)
Subject: SCSI questions
Message-ID: <1991May22.192151.3245@magnus.acs.ohio-state.edu>
Originator: ewahl@top.magnus.acs.ohio-state.edu
Keywords: SCSI,IN-2000,disk
Sender: news@magnus.acs.ohio-state.edu
Nntp-Posting-Host: top.magnus.acs.ohio-state.edu
Organization: The Ohio State University
Distribution: usa
Date: Wed, 22 May 1991 19:21:51 GMT
Lines: 26

I recently purchased an IN-2000 SCSI host adapter from HDI.  I like a lot,
but I hace been seeing weird errors at boot time and from different disk-
optimiser programs.  Occassionally when I boot I get a 40x25 message 
NO ROM BASIC SYSTEM HALTED
It seems like the disk (MAXTOR XT8760S) is working fine, and when I reboot,
it works just fine.  Could this just be the system booting before the disk
has responded to a ready?  I have a 286 20, with 1M RAM.  It runs around 23-
24 MHz.  and starts VERY quickly. (AMI bios)

Also I have been using Central Point Compress on my old ST-506 for as long
as I can remember, but it does not work now. error #(843?) comes up.
I no longer have a CMOS entry, could this cause a problem?  Norton Speed
Disk seems to work fine, but I like the clearing of free Clusters that 
Compress does.  Can I do something to fool it?  

Also checkit ver. 2.(11?) seems to think that there are 2 drives, both 
non -dos.  Yet, when I select drive 1 for a test, no drive is detected.

I am running DOS 4.01 on a Advantage PC 286-20.  Any help would be 
appreciated.   


-- 
    ewahl@magnus   Edward A. Wahl	Ohio State University Engineering
           "VM is a text adventure, when you win, you get to use UNIX"
"College ==> The best 5 or 6 years of your life"
