Newsgroups: comp.sys.hp
Path: utzoo!utgpu!cunews!cunews2!bnrgate!bwdls61!bwdlh128!awhitton
From: awhitton@bwdlh128.BNR.CA (Alan Whitton)
Subject: Re: SAM
Message-ID: <1991May21.184707.5495@bwdls61.bnr.ca>
Sender: usenet@bwdls61.bnr.ca (Use Net)
Reply-To: awhitton@bnr.ca
Organization: Bell Northern Research, Ottawa
References: <1331@prlhp1.prl.philips.co.uk> <5570642@hpfcdc.HP.COM>
Date: Tue, 21 May 1991 18:47:07 GMT


In article <5570642@hpfcdc.HP.COM>, perry@hpfcdc.HP.COM (Perry Scott) writes:
|> >When SAM replaced reconfig in HP-UX 7, I wish they had written it
|> >to allow the "-m" option as in reconfig, so that you could run it
|> >in line mode on a non-HP screen.
|> >
|> >Not having an HP screen in my office means a long walk to the Computer
|> >room to use the console to setup/delete users.
|> >
|> >Can obviously do this without SAM, its just that reconfig was nice to
|> >use.
|> >
|> >  Andy
|> 
|> We added vt100 and wyse30 support for 8.0.  Does this help ?
|> 
|> Perry

It helps, but what about an X11 xterm? I would have thought that was
the next logical choice (of course I never studied logic :-).

Be Seeing You,
Alan Whitton
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
BNR Ottawa                   Disclaimer: "This is only my opinion"
BITNET: awhitton@bnr.ca  OR  UUCP: ...uunet!bnrgate!forum!awhitton
