Newsgroups: comp.dcom.sys.cisco
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!news.cs.indiana.edu!cica!ogre!ssw
From: ssw@ogre.cica.indiana.edu (Steve Wallace)
Subject: Re: Cisco AGS+s and Cabletron FOTs
Message-ID: <ssw.674176449@ogre>
Sender: news@cica.indiana.edu (News System)
Nntp-Posting-Host: ogre.cica.indiana.edu
Organization: Indiana University
References: <mdmuG.u#+1@atlantis.psu.edu> <1991May09.144306.3930@shl.com> <1475@nih-csl.nih.gov>
Date: 13 May 91 23:14:09 GMT

In <1475@nih-csl.nih.gov> kabara@alw.nih.gov (Joe Kabara) writes:

>you can use the Cabletron FOTs back-to-back, you just need to put a repeater
>between the tap on your etherent and the FOT you try to hook up to this.

These FOTs also work back-to-back to another DTE device, like a router.
We connection ciscos to ciscos and the combo works well.  When we
are trying to connect a remote ethernet to a cisco via fiber, we
use the DEC fiber optic repeater at the far end.  It works just 
fine in with the cabletron FOT.

--
====================================================================
Steven Wallace                |  wallaces@ucs.indiana.edu (internet)
Manager Network Operations    |  wallaces@iubacs          (bitnet)
Indiana University            |  (812) 855 - 0960         (voice)
====================================================================
