Newsgroups: comp.sys.sgi
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!elroy.jpl.nasa.gov!decwrl!stanford.edu!leland.Stanford.EDU!baroque.Stanford.EDU!jim
From: jim@baroque.Stanford.EDU (James Helman)
Subject: Re: How do I make a slider in a GL program?
In-Reply-To: dan@doctor.chem.yale.edu's message of 6 May 91 20:35:39 GMT
Message-ID: <JIM.91May6162030@baroque.Stanford.EDU>
Sender: news@leland.Stanford.EDU (Mr News)
Organization: Stanford University
References: <1991May6.203539.8508@cs.yale.edu>
Date: 6 May 91 16:20:30
Lines: 30

FAQ: Some options:

1) Try Dave Tristram's panel library, which is available free from
NASA Ames.  Unfortunately, to please the bean counters, it isn't
available by FTP.  You'll need to write for a copy.

	Panel Request
	MS T045-1
	NASA  Ames Research Center
	Moffett Field, California 94035

	panel-request@nas.nasa.gov

2) FORMS is another package.  It's available by anonymous FTP to
archive.cs.ruu.nl and perelandra.cms.udel.edu, but I haven't tried it.
I've heard it has less variety than the panel library, but is simpler.

3) Are you X-ward bound?  If ugliness doesn't bother you, you could
use the free Athena Widget set (from the IRIX 3.3 X developer's tape
or from ftp to fresnel.stanford.edu).  If aesthetics matter, you could
buy Motif for that "3D" look.  However, both of these require a little
more than a mkslider() call. X, you understand.  ;-).

-jim

Jim Helman
Department of Applied Physics			Durand 012
Stanford University				FAX: (415) 725-3377
(jim@KAOS.stanford.edu) 			Work: (415) 723-9127

