Newsgroups: comp.sys.apple2
Path: utzoo!utgpu!utstat!philip
From: philip@utstat.uucp (Philip McDunnough)
Subject: Re: GS Telnet
Message-ID: <1991May5.162208.19464@utstat.uucp>
Organization: U of Toronto Statistics
References: <694@generic.UUCP>
Date: Sun, 5 May 1991 16:22:08 GMT

In article <694@generic.UUCP> marekp@pnet91.cts.com (Marek Pawlowski) writes:
>There isn't much involved in getting telnet written for the GS.  All you need
>to write is either TCP/IP or SL/IP (depending on the connection type), and use
>telnet through that.  Easy project.

You can't be serious. Moving the necessary NCSA code over to the GS is
surely not an easy project( but by all means do it!). Since you should
be getting a GS soon, SLIP would be most appreciated. I would like to
connect into my NeXT where they have only recently come out with a
commercial SLIP for the 040 computers. To my knowledge there is no
shareware, freeware,etc...support for SLIP on that platform, and it isn't
that people aren't trying.

Philip McDunnough
philip@utstat.utoronto.ca
[my opinions,...]
