Newsgroups: comp.unix.amiga
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!van-bc!ubc-cs!alberta!cpsc.ucalgary.ca!enme3!pepers
From: pepers@enme3.ucalgary.ca (Brad Pepers)
Subject: 3000UX kermit
Message-ID: <1991May1.141845.7052@cpsc.ucalgary.ca>
Summary: won't talk to my modem
Nntp-Posting-Host: enme3.enme.ucalgary.ca
Reply-To: pepers@enme3.UUCP (Brad Pepers)
Organization: U. of Calgary, Calgary, Alberta, Canada
Date: Wed, 1 May 91 14:18:45 GMT


Is there anything special I have to do to make kermit talk to my modem? I
have a 3000UXD and a 1200 baud modem (ick!!!! 8^) which is on the internal
serial line. I go into kermit and do the following:

	set line /dev/term/ser
	set baud 1200
	either
		connect
		atdtxxx-xxxx
	or
		dial xxx-xxxx
	or many other combinations

It seems by modem receives nothing. I have tried doing a set modem hayes
at various points in the above steps and it didn't help. Handshaking is
off, flow control is xon/xoff.

Anyone have kermit working?????

    Brad Pepers (pepers@enem.ucalgary.ca)

