Newsgroups: comp.text.tex
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!news.cs.indiana.edu!maytag!watmath!watserv1!vlsi!atschnei
From: atschnei@vlsi.waterloo.edu (Todd Schneider)
Subject: SliTeX fonts for OzTeX ???
Message-ID: <1991May2.205745.12711@vlsi.waterloo.edu>
Keywords: SliTeX, OzTeX, metafont
Organization: University of Waterloo
Date: Thu, 2 May 1991 20:57:45 GMT
Lines: 26

I recently built some cm fonts for OzTeX so I could get SliTeX running.
However, OzTeX gives me mysterious errors like: Bad Fix Byte and 
Bad ID Byte whenever I try to preview. I built the fonts using
the version of metafont that is provided with emTeX and uploaded
everything to my Mac as binaries.

What causes these errors and how can I fix them?

If no one can answer this question perhaps someone knows ...

1. Where can I get a version of metafont for the Mac that is not
   an MPW tool? (I've checked into macmetafont, but it appears
   that MPW is required to run it.) 

2. Where can I get the following fonts (300dpi) lcmss8, lcmssi8, lcmssb8,
   cmmi8 (and their invisable partners) ilcmss8, ilcmssi8, ilcmssb8 and
   icmmi8 in the usual sizes (300,329,360,432,518,622,746) that will work
   with OzTeX?

Thanks,
Todd.
-- 
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+ University of Waterloo               | atschnei@vlsi.waterloo.edu +
+ Department of Electrical Engineering | atschnei@vlsi.uwaterloo.ca +
+ VLSI Group                           | Office:(519)885-1211 x3896 +
