Newsgroups: comp.sys.amiga.misc
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!batcomputer!cornell!johnhlee
From: johnhlee@CS.Cornell.EDU (John H. Lee)
Subject: Re: More on A3000
Message-ID: <1991Apr25.183325.8806@cs.cornell.edu>
Sender: news@cs.cornell.edu (USENET news user)
Nntp-Posting-Host: urd.cs.cornell.edu
Reply-To: johnhlee@cs.cornell.edu (John H. Lee)
Organization: Cornell Univ. CS Dept, Ithaca NY 14853
References: <1991Apr25.152150.5637@bronze.ucs.indiana.edu>
Date: Thu, 25 Apr 1991 18:33:25 GMT
Lines: 39

In article <1991Apr25.152150.5637@bronze.ucs.indiana.edu> tagreen@lothario.ucs.indiana.edu (Todd Green) writes:
>1)  I tried to do what the rest of you suggested and create a virtual
>screen, and to use a higher resolution.  I went into the preferences
>folder and used two apps to do this.  Screen Size and Overscan. (This
>is from memory so the exact names might be off a little).  In any case
>I could not get out of 640x200 resolution, nor create a virtual
>screen.  I tried using the programs (typing in the numbers) and then
>clicked both "save" and "use", I tried to reboot, nothing happened it
>just stayed there in 640x200.  I tried asking the dealer he said "it's
>a beta version of the OS and doesn't seem to be working."  Help?

The ScreenSize preferences tool for a virtual workbench works fine on my
A3000.  Just enter the new screen dimensions into the appropriate fields
and click Save or Use.  Overscan tool works fine as well.  To change the
mode from 640x200 to some other mode, use the ScreenMode preferences tool.
All three makes the changes immediately--no reboot needed.


>2)  I noticed another problem when moving the mouse pointer.  Every other
>scan line would "drop out" whenever I moved the pointer.  This produced
>a very jittery effect.  I also noticed this happened when I scrolled
>windows.  Every other line in an icon would disappear and the
>reappear. (Same for the cursor when scrolling vertically).  I again
>questioned the dealer and he said that it was due to the de-interlacer
>of the A3000.  I can hardly believe this.  Again they were really nice
>people but their expertise is well....lacking.  Has anyone else been
>plagued by this?

Yes, this is due to the deinterlacer, but since you were in 640x200 non-
interlaced mode, you shouldn't get this effect.  The effect isn't that
noticeable to me and I have my system set up for 688x458 (A3000-25 with
A1950 multiscan monitor.)  I was expecting all sorts of artifacts, but
was pleasantly surprised.  Perhaps your dealer's A3000 was out of
adjustment?

-------------------------------------------------------------------------------
The DiskDoctor threatens the crew!  Next time on AmigaDos: The Next Generation.
	John Lee		Internet: johnhlee@cs.cornell.edu
The above opinions of those of the user, and not of this machine.
