Newsgroups: comp.dcom.lans
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!dsuvax!ghelmer
From: ghelmer@dsuvax.uucp (Guy Helmer)
Subject: Request for help with WD StarCard
Message-ID: <1991Apr26.152325.9045@dsuvax.uucp>
Organization: Dakota State University
Date: Fri, 26 Apr 1991 15:23:25 GMT

If someone on the net can help me with info on this card, I'd sure
appreciate it.  I purchased a batch of cards marked
"WD8000SL  ASSY 61-600026" at the top, the boards are only about 2/3
the height and half the length of a full-size IBM PC interface board,
and almost the whole board was soldered using surface-mount devices.
Jumper block W2 has 8 pins, W4 has 8 pins, W1 has 16 pins, W3
has 12 pins, W5 has 2 pins, and W6 has 2 pins.

A Western Digital person I spoke with a while back said he couldn't
find any documents for this specific board.  I would like to find out
what jumper settings set I/O port numbers, interrupt requests, and
shared RAM addresses for this board.  Western Digital's StarTest program
works with the boards, but I haven't been able to determine much from
it other than the jumper settings for various interrupt requests.


Any help will be gratefully received.
-- 
Guy Helmer, Dakota State University Computing Services
helmer@sdnet.bitnet, dsuvax!ghelmer@wunoc.wustl.edu, wupost!dsuvax!ghelmer
"I'm a cowboy, on a keyboard I ride..."
                                        -- with apologies to Bon Jovi
