Newsgroups: comp.sys.amiga.hardware
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!metahawk
From: metahawk@itsgw.rpi.edu (Wayne G Rigby)
Subject: Re: Will a C=1351 mouse work with an Amiga?
Message-ID: <2.rgqhk@rpi.edu>
Sender: Wayne Rigby
Nntp-Posting-Host: jec413.its.rpi.edu
Organization: Rensselaer Polytechnic Institute, Troy NY
References: <91111.235453JBK4@psuvm.psu.edu>
Date: 22 Apr 91 07:29:58 GMT
Lines: 21

In article <91111.235453JBK4@psuvm.psu.edu> JBK4@psuvm.psu.edu writes:
>I have an Amiga 3000 and a C64-C with a 1351 mouse.  Both my Amiga mouse and my
> 1351 mouse look the same but I didn't want to risk sticking the 1351 into my A
>miga and having something fry.  So my question is, Can I use a Commodore 1351 m
>ouse(made for the 64) with my Amiga 3000 or any other Amiga?
>Thanks.
>
>Jason Koszarsky, JBK4@PSUVM

No.  This is probably why the 1351 has the huge block on the end of the cable
which won't let you connect it to an A2000 (I don't know about the A3000).
The power and GrouND lines should (actually, have to) be the same as the
Amiga's joy/mouse ports, so you won't destroy anything by plugging it in.
The mouse mode will not work on the Amiga, but the joystick mode should
work in place of a joystick (of course).

                                     Wayne Rigby
                                     Computer and Systems Engineer (in training)
                                     Rensselaer Polytechnic Institute
                                     metahawk@rpi.edu

