Newsgroups: comp.dcom.sys.cisco
Path: utzoo!utgpu!cunews!nrcnet0!vm.nrc.ca!RRH
From: RRH@vm.nrc.ca
Subject: Logging Levels
Message-ID: <1991Apr23.191425.29254@nrcnet0.nrc.ca>
Sender: root@nrcnet0.nrc.ca (Operator)
Nntp-Posting-Host: vm.nrc.ca
Organization: National Research Council
Date: 23 Apr 1991 15:10:46 EDT


Hi,
I did post this previously and somebody from  cisco (ralls@cisco.com)
did reply, wanting to know the Cisco's version etc. I have supplied
that info. Since there has been no reply, please excuse a repeat.

Ratilal Haria

*************************************************************************

Can somebody tell me at what level is the following message:

     BF:  buffer in list, PC=50294, ptr=AB45C
    Process="Novell SAP", pid=17, level= 0

The reason I am asking is that these are the only messages I am getting
when I have logging trap set warnings. So are these warnings, errors, critical
etc. and what does it mean and how can I fix it.

------------------------------CISCO VERSION------------------------------

GS Software (GS2-X), Version 8.1(14)
Copyright (c) 1986-1990 by cisco Systems, Inc.
Compiled Wed 02-May-90 21:20

System Bootstrap, Version 4.2(4)

m60gate uptime is 4 days, 5 hours, 16 minutes
System restarted by reload
Running default software

CSC2 (68020) processor with 1024K bytes of memory.
X.25 software.
3 MCI controller.
6 Ethernet/IEEE 802.3 interface.
4 Serial network interface.
32K bytes of non-volatile configuration memory.
Configuration register is 0x301
****
ralls@cisco.com     RRH@VM.NRC.CA        4/12/91*Logging Message level
