Newsgroups: comp.unix.aix
Path: utzoo!utgpu!cunews!nrcnet0!cfd.di.nrc.ca!ng
From: ng@cfd.di.nrc.ca (Kai Ng)
Subject: xengine performance on RS6000
Message-ID: <1991Apr17.190136.17974@nrcnet0.nrc.ca>
Followup-To: comp.unix.aix
Sender: root@nrcnet0.nrc.ca (Operator)
Nntp-Posting-Host: cfd.di.nrc.ca
Reply-To: ng@cfd.di.nrc.ca
Organization: Informatics, National Research Council Canada
Date: Wed, 17 Apr 91 19:01:36 GMT

We have tried out the xengine on our RS6000 model 530 running 3003.
The system is configured with 64meg of main memory and a 24-bit, 3D
and Z-buffer graphics subsystem.

The outcome, which ranges from 41 to 49, is extremely disappointing.
We also have a Silicon Graphics 4D/25G and a SUN 3/60. Both perform
about twice as good as the IBM.

However somebody has claimed that on a 550, the xengine runs at 333.
Has anybody tried it on their RS6000 ?

I suspect it could due to something not configured right in our system.
Any opinion welcome.

-- 
-----------------------------------------------------------------------------
Kai S. Ng                     Informatics, National Research Council Canada
INTERNET ng@cfd.di.nrc.ca     M-60 Montreal Road, Ottawa, Canada    K1A 0R6
BITNET   kain@nrcvm01.bitnet  VOICE (613) 993-0240       FAX (613) 954-2561
