Newsgroups: comp.sys.ibm.pc.misc
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!kudla
From: kudla@rpi.edu (Robert J. Kudla)
Subject: Re: DesqView 386 Problem
In-Reply-To: mlord@bwdls58.bnr.ca's message of 5 Apr 91 13:53:39 GMT
Message-ID: <5p-gy._@rpi.edu>
Nntp-Posting-Host: nuge107.its.rpi.edu
Organization: just say no!
References: <4m.gk.p@rpi.edu> <6383@bwdls58.bnr.ca>
Distribution: comp
Date: 5 Apr 91 21:00:14 GMT
Lines: 21

In article <6383@bwdls58.bnr.ca> mlord@bwdls58.bnr.ca (Mark Lord) writes:

   Here is the problem.. someone goofed in the Desqview Setup.  Go
   back into the Desqview Setup program and find the "Common Memory"
   entry.. change it to something MUCH smaller, like 20K or so.  The
   name is somewhat misleading, "common memory" is used by Desqview
   Programs for odds and ends (I dunno what), and each window needs a
   couple of K of it, so 20K is plenty.  Doing this will free up piles
   of XMS/EMS for more general purpose use.  Pretty silly, actually, I
   think QEMM oughta pool the "Common memory" on demand from the same
   pot of XMS/EMS, but it doesn't.

Thank you!  Good thing I read c.s.i.p.m for a day, 'cause all I'd
gotten in the mail was "Only 2 megs?  Ugh!" from about 5 different
people.... 

Robert Jude Kudla <kudla@rpi.edu>
                                   
No more bars!  No more cages!  Just rollerskating, disco music, and
the occasional light show....

