Newsgroups: comp.sys.3b1
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!sci.ccny.cuny.edu!sci.ccny.cuny.edu!jeffrey
From: jeffrey@sci.ccny.cuny.edu (Jeffrey L Bromberger)
Subject: Maxtor 2190 jumper settings?
Message-ID: <1991Mar24.193734.5062@sci.ccny.cuny.edu>
Followup-To: comp.sys.3b1
Summary: How do you set the drive select positions?
Keywords: XT2190 jumpers DRUN+ICUS
Sender: jeffrey@sci.ccny.cuny.edu (Jeffrey L Bromberger)
Reply-To: jeffrey@sci.ccny.cuny.edu (Jeffrey L Bromberger)
Organization: City College of New York - Science Computing Facility
Date: Sun, 24 Mar 91 19:37:34 GMT

Hi again.  I'm trying to install a maxtor 2190 as my boot drive on my
home machine.  The machine has the ICUS board installed, and I have a
Seagate 40Mb drive as the second drive.  Anyways, whenever I try to
format the new drive with the enhanced diagnostics, both drives have
the select light come on.  The machine then freezes.  No head movement.
No nothing.

I pull the yellow DIP jumper out of the maxtor (it's the first in the
chain), but that makes no difference.  Can anyone out there tell me
how to move the jumpers around to tell it that it's drive 0 (also, the
rest of the jumper settings would be nice) ?  I'd really like to get
this thing on line, but I've been tied up, and my first shot failed
miserably :-(

Life would have been much easier if there was a manual with the drive...

j
-- 
Jeffrey L. Bromberger
System Operator---City College of New York---Science Computing Facility
jeffrey@sci.ccny.cuny.edu			jeffrey@ccnysci.BITNET
	Anywhere!{cmcl2,philabs,phri}!ccnysci!jeffrey
