Newsgroups: comp.sys.ibm.pc.hardware
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!caen!irie.ais.org!mjo
From: mjo@irie.ais.org (Mike O'Connor)
Subject: Mars 105 Scanner
Message-ID: <1991Mar19.164732.21787@engin.umich.edu>
Summary: Anyone had CMOS problems with this product?
Keywords: CMOS, Mars, Epson, Scanner
Sender: news@engin.umich.edu (CAEN Netnews)
Reply-To: mjo@ais.org
Organization: Artificial Intelligence Society
Distribution: na
Date: Tue, 19 Mar 1991 16:47:32 GMT

Recently, I tried to install a Mars 105 Scanner into an Epson AT.
After doing so, I have found that the CMOS on the machine becomes
intermittently corrupted upon cold boot.  Roughly 1/2 the time -- 5
times out of 9, so far, a cold boot flushes the CMOS on the machine,
replacing it with totally wrong specifications.  

The card's specifications say that one should just be able to plug it
in and it will work as a serial device (COM4).  I tried two different
slots to plug it into, but the problems persisted.

Has anyone had similar problems with this scanner?  Has anyone
possibly had any similar problems with Epson ATs?  

					...Mike

Internet: 	mjo@ais.org
Domain UUCP: 	mjo@ttardis.UUCP 
Bang UUCP: 	...!uunet!sharkey!cfctech!ttardis!mjo
