Newsgroups: comp.sys.amiga.hardware
Path: utzoo!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!maverick.ksu.ksu.edu!zoot.avgrp.cr.rok.com!dah
From: dah@zoot.avgrp.cr.rok.com (Dave Haverkamp)
Subject: Re: 68010 Chip in A1000?
Message-ID: <1991Mar18.184922.13525@zoot.avgrp.cr.rok.com>
Organization: Rockwell International; Cedar Rapids, IA
References: <21879@know.pws.bull.com>
Date: Mon, 18 Mar 91 18:49:22 GMT

In article <21879@know.pws.bull.com> aa377@cleveland.Freenet.Edu (Ken Kopin) writes:
>
>
>  Will replacing my 68000 with a 68010 without changing any timing
>or anything give me any benifit? I toasted my 68000, and I might as
>well put in a good one, while I'm at it.
>
>                                Ken Kopin
>
	YES!  The speed up will not be very noticeable for most programs.
However for math intensive programs (RayTracing for example), you will see
approximately 50% speed up.  I did verify that with some sample ray traces
when I put a 68010 in my A1000.  Another benefit is that the 68010 will 
drive the system buss better.... ( With the 68010 I have had no need to do
anything to my PALs. i.e. grounding/replacement ).  My system has both a
Memory expansion, and SCSI controller on it.  However, I did recently 
replace the PAL's and ground them, mostly for the added assurance of not
having any problems.  Some older programs will have problems... but DeciGel
takes care of that for me.  In all, $10 is a worth while update to any
stock Amiga, if you can't afford to add 32 Bit memory or an 020/030 to the
system.  Just don't expect fantastic speed increases.  It would be nice if
C= would drop the 68K and start putting 68010's in A500's & A2000's. (Even
better would be having 020's or better in all Amiga's).

-- 
--------------------------------------------------------------------------
David A. Haverkamp                    Collins Commercial Avionics Division
                                      Rockwell International   MS 124-211
INTERNET: dah@zoot.avgrp.cr.rok.com   Cedar Rapids, Iowa 52498
