Newsgroups: comp.windows.ms
Path: utzoo!utgpu!cunews!bcars8!bnrgate!bigsur!bigsur!andrzej
From: andrzej@bigsur.UUCP (Andrzej Bieszczad)
Message-ID: <1990Jul31.150601.22159@bigsur.uucp>
Sender: news@bigsur.uucp (Usenet)
Reply-To: andrzej@bigsur.UUCP (Andrzej Bieszczad)
Organization: Bell-Northern Research, Ottawa, Canada
Date: Tue, 31 Jul 90 15:06:01 GMT

It is probably not the best place for the question which is only
related to MS Windows.

I have ATI Wonder card. When I run it in 800x600x16 mode, the screen 
is much smaller than in other modes. I like 800x600 on my 14", since
VGA is too crowdy, and 1024x768 is too slow (and small too).

Once I received Technical Note No.035 from ATI, in which they
described a hidden feature of VSETUP. Unfortunately, I lost the
second page which was the most important.

Does anybody remember how to use the feature? It allowed to adjust
the size of a screen in the 132-column, 800x600 and 1024x768 modes.

I tried to contact technical support at ATI, but the phone is always
busy.

Thanks in advance for help.

=======================================================================
Andrzej Bieszczad (Bell-Northern Research, Ltd.)
USENET:  uunet!bnrgate!bigsur!andrzej
BitNet:  andrzej@BNR.CA
Surface: Dept. 7G12, P.O. Box 3511, Station C,    Phone: (613) 763-2259
         Ottawa, Ontario, Canada, K1Y 4H7         Fax:   (613) 763-3283
=======================================================================

