Newsgroups: comp.sys.amiga.hardware
Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!umich!bushido!jamesb
From: jamesb@bushido.uucp (Jim Harvey)
Subject: Re: Panasonic KX-P1124 Printer
Message-ID: <1990Jul12.200434.1741@bushido.uucp>
Organization: Bushido Systems of Ann Arbor, Michigan.
References: <163.tnews@tower.actrix.co.nz>
Date: Thu, 12 Jul 90 20:04:34 GMT

In article <163.tnews@tower.actrix.co.nz> johnv@tower.actrix.co.nz (John Veldthuis) writes:
>I want to upgrade my printer with the 32K ram chip but my local dealer
>wants NZ$139 for it. I know it is a 32K by 8 bit CMOS ram chip but can
>anyone tell me what the number on it is. My local dealer won't tell me as
>He will lose too much money. Thanks
>
>--
>*** John Veldthuis, NZAmigaUG.         johnv@tower.actrix.co.nz       ***

A type 62256 or equivalent.  I paid about $8.00 for mine, they are advertised
in many places, ask for 62256 but there are many equivalent part numbers. 
The real trick is getting the Panasonic apart to install the chip.  You 
place your fingers on the top of the front cover, press down and pull forward.
The cover should snap off, be careful of the attached wires.  Remove the three
screws revealed and the printer top can be removed.  There is only one empty
socket, put the chip there oriented as the two adjacent.
-- 
-------
Jim Harvey                      |  
Michigan Bell Telephone Co.     |  "Ask not for whom the bell tolls and you 
29777 Telegraph  Rm 3352        |   will only pay station to station rates."
