Newsgroups: comp.sys.mac
Path: utzoo!utgpu!jarvis.csri.toronto.edu!csri.toronto.edu!thomas
From: thomas@csri.toronto.edu (Thomas Kurfurst)
Subject: CAD advice, experiences, references needed !!!
Message-ID: <1988Jan10.225914.19741@jarvis.csri.toronto.edu>
Organization: University of Toronto, CSRI
Date: Sun, 10-Jan-88 22:59:14 EST




I am considering investing a considerable amount of money in CAD and/or
architectural design specific software that will run on either a Mac Plus
or, what is more likely, a Mac II.           

I would very much appreciate hearing from anyone who is knowledgeable and/or
has had experience with a Mac based system (or, if relevant, IBM based) regarding matters such as:


	1. features to look for
	2. benchmarks
	3. recommended systems
	4. systems to avoid
	5. experience with CAD generally---productivity, ease of use etc...
	6. references to any relevant literature, companies

If there is sufficient interest I will post a summary.

Thank You very much!

________                                                                   

Thomas Kurfurst     thomas@gpu.utcs.toronto.edu (CSnet,UUCP,Bitnet)
205 Wineva Road     thomas@gpu.utcs.toronto.cdn (EANeX.400)
Toronto, Ontario    {decvax,ihnp4,utcsri,{allegra,linus}!utzoo}!gpu.utcs!thomas
CANADA M4E 2T5      thomas%gpu.utcs.toronto.edu@relay.cs.net (CSnet)
(416) 699-5738

________                                                                      
-- 

________                                                                   

Thomas Kurfurst     thomas@gpu.utcs.toronto.edu (CSnet,UUCP,Bitnet)
