https://tinytoolk.it/toolkits/recantha-kit/

home toolkits tools manifesto about fedi

Recantha's Tiny Toolkit

By: Mike Horne
---------------------------------------------------------------------

A general purpose kit used for various purposes including a fair
amount of stationery bits to help with design.

Case

[TinyTookit]

Lihit Lab Large Maroon Camo Book-Type Pen Case, LL00005-MC

Contents

Exterior

The exterior of the case has some pockets, so I've added some sticky
notes.

[StickyNote]

  * 500 thin sticky notes or markers:

Layer 1 - Multitool, scissors and penknife

My first layer is dominated by a fold-up multitool (see below), plus
there's a pair of (rubbish) scissors and a Swiss Army knife.

[FirstLayer]

  * Multitool - this one was from Temu
  * Scissors
  * Swiss Army knife

[Multitool]

Layer 2.1 - Cutters, grips and pen

[SecondLaye]

  * Chisel-tip black Sharpie
  * Pair of side cutters
  * Scalpel (mind your fingers!)
  * Small Stanley adjustable spanner/wrench
  * Two box/craft cutters (of many!)

Layer 2.2 - Miscellaneous

[SecondLaye]

  * Small screwdriver handle
  * Set of screwdriver bits plus a socket adapter
  * Wire stripper/cutter
  * Tweezers of various configurations.

[SecondLaye]

  * Small adjustable spanner/wrench
  * Another box cutter.
  * Two pencils I picked up for free from eSpares
  * Small brush (suitable for clearing cr@p out from a keyboard)
  * Large pair of tweezers.

[SecondLaye]

Layer 3 - Cables and stationery

[ThirdLayer]

  * Collection of USB cables and USB 2-way splitter
  * Paper clips of different sizes and colours!
  * Bulldog clip in there
  * microSD to full sized SD adapter.

[ThirdLayer]

  * Another multitool
  * Small (circuit board) ruler
  * Small pair of tweezers
  * Another box cutter (!)
  * Socket set
  * An iFixit prise tool (the blue bit of plastic)
  * Small highlighter
  * Tiny measuring tape
  * Eraser.

[ThirdLayer] [HammerMult]

It's quite a heavy kit, because of the multitools, but it's very
handy!

As you can see in my Tiny Tookit, there's a bit of duplication
(especially box cutters!), but not much space left. I intend to
expand the kit when I can to include an electrical-size screwdriver,
some electrical tape and other stuff I can find as we go along and
then get rid of the duplicates to make space.

---------------------------------------------------------------------

Licensed under MIT
Built with Zola using anemone theme & veqev colors.